Ultra Power UP300AC Touch Instruction Manual page 21

SYSTEM SET UP
SYSTEM
INPUT LOW
REST TIME
LCD LIGHT
8
SAFETY RESET
OPTION SYSTEM
ITEM SELECTION
CAPACITY OFF
CUT OFF 100-20000 mAh
SAFETY OFF
TIME 1-720 Min
TEMP
20 C/68 F -
CUT OFF
80 C/176 F
Please touch "TIME OFF" and "CAPS OFF" screen to make the functions ON or OFF. And touch
"+" and "-" to get the proper parameter.
NOTE: The TEMP CUT OFF function can not be OFF.
11.0V
10min
KEY BUZZER
ON ON
ABOUT BACK
This program sets the maximum charge capacity that will be
supplied to the battery during charge. If the delta peak voltage
is not detected nor the safety timer expired by any reason, this
feature will automatically stop the process at the selected
capacity value.
When you start a charge process, the integral safety timer
automatically starts running at the same time. This is
programmed to prevent overcharge the battery if it proves to
be faulty, or if the termination circuit cannot detect the battery
full. The value for the safety timer should be generous enough
to allow a full charge of the battery.
The battery's internal chemical reaction will cause the
temperature of the battery to rise. If the temperature limit is
reached, the process will be terminated.
19
DESCRIPTION