Sony CBK-WA01 Operating Instructions Manual page 23

When using the Web menu (page)
Problem
The Web menu (page) does not appear.
I get an error when I try to upload.
When using Sony Planning Metadata Add-in
Problem
I get an error when I run "Save to XDCAM". Make sure that the camcorder and computer are connected to the network.
Resolution
Make sure that the camcorder and computer are connected to the network.
Check the IP addresses of your computer and camcorder. Also make sure that
the subnet masks are set to the same value.
Sample setting:
If IP address of camcorder is 192.168.1.10
r
Set the IP address of the access point to 192.168.1.100.
Set the parts that are not underlined to the same values.
Set the subnet mask on both to 255.255.255.0.
See page 7 or page 8 for details about setting the IP address.
On the Wi-Fi page of the MAINTENANCE menu, go to the Wi-Fi SETTING page,
and check the key (NETWORK KEY) setting.
Do the following to check the wireless connection status of the camcorder.
Check the Wi-Fi status indication (see page 10) on the LCD monitor.
If there is no indication
The camcorder does not have a wireless connection. See the other resolutions.
If there is an indication
Make sure that it is not flashing.
If it is flashing (status 3): The camcorder is trying to make a wireless
connection. If this status continues for a long time, then either the camcorder
cannot find a computer to connect to, or the settings on the computer and
camcorder do not match. Check the settings of the camcorder and computer.
If it is solid (status 4): The wireless connection is complete.
If your application (Sony Planning Metadata Add-in or live logging) does not
function in this status, confirm the procedure in "Configuring Your Camcorder
to Enable Wi-Fi Connections" (page 6).
Make sure that there are no devices using the 2.4 GHz frequency band nearby.
If there are devices nearby that use the 2.4 GHz frequency band (examples are
microwave ovens and Bluetooth
Move away from any such devices, or turn them off.
If the camcorder's Live Logging Mode is set to "View", set it to "OFF" or "LIVE".
If the camcorder is set to thumbnail mode, turn thumbnail mode off.
If a menu is displayed on the camcorder, cancel the menu.
If the camcorder is in Picture Cache mode, turn Picture Cache mode off.
If there is no disc in the camcorder, insert one. If the disc is write protected, turn
off write protection.
Resolution
If a menu is displayed on the camcorder, cancel the menu.
If the camcorder is in Picture Cache mode, turn Picture Cache mode off.
If there is no recording media in the camcorder, insert one. If the media is write
protected, turn off write protection.
Open the [Settings] dialog of Sony Planning Metadata Add-in, and make sure that
the registration information is correct (see page 19).
Open the [Settings] dialog of Sony Planning Metadata Add-in, and make sure that
one of the camcorders is checked (see page 19).
®
), it will be more difficult to make a connection.
23
Troubleshooting