Sony CBK-WA01 Operating Instructions Manual page 10

When the menu display is cleared, the Wi-Fi status
indication which shows the wireless connection is
successful appears on the upper right on the LCD
monitor (four squares and "11g" (or "11b")).
The Wi-Fi status indication changes in accordance
with the wireless connection status of the camcorder
(see the next section "Wi-Fi status indication").
Note
The computer may become disconnected during steps
3 to 5. If this happens, start over from step 1, and
reopen the connection.
Wi-Fi status indication
The Wi-Fi status indication on the LCD monitor screen
changes as follows, in accordance with the wireless
connection status of the camcorder.
Status Indication
1 None
2
3
Flashing
4
Solid
To terminate the connection
For Windows XP
Right click [Wireless Network Connection] in the
[Network Connections] window, and click [View
Available Wireless Networks]. Click "WF1" in the
[Wireless Network Connection] dialog, and then click
[Disconnect].
For Windows Vista
In the [Network and Sharing Center] window, click
[Connect to a network] under [Tasks]. Click [WF1] in the
[Connect to a network] dialog, and then click
[Disconnect].
10
Making a Wi-Fi Connection to Your Computer (Ad hoc Mode)
Wi-Fi status indication
Wireless connection status
This adapter is not in operation.
Wireless LAN is not connected.
Wireless LAN connection is being
made.
Wireless LAN connection is complete.
xx
: Reception level
xx
11n/11g/11b: Wireless LAN protocol
To revert to the default settings (reset)
If you have trouble making a connection, or you want to
start over, you can reset your Wi-Fi connection settings to
their defaults.
1
Select NET CFG RESET: EXEC on the M24
NETWORK 2 page of the MAINTENANCE menu,
and press the MENU knob.
Camcorder's MAC address
The message "RESET DATA OK?" appears.
2
If you want to reset the configuration, select "YES"
and press the MENU knob. If you want to cancel the
reset, select "NO" and press the MENU knob.
If the reset is executed, "COMPLETE" appears.
The camcorder attempts to connect to the network
using a MAC address as the SSID.