Table of Contents
Advertisement
Click [Execute] when you changed the IP address.
Wi-Fi page
Click Maintenance >Wi-Fi in the Web menu to display the
Wi-Fi page.
Wi-Fi Status area
Shows the wireless connection status.
Wi-Fi Settings area
You can confirm or change the current settings for a Wi-Fi
connection, and start a connection.
Item
Setting operations
SSID
Enter the name of the network to
connect.
Search
Search for the network to connect.
Type
Select the Wi-Fi connection mode.
Infra: Infrastructure mode
Adhoc: Ad hoc mode
Channel
Select the channel used for
connection.
When [Type] is [Infra]: auto
When [Type] is [Adhoc]: 1ch to
Authentication
Select the encryption type.
(display only)
11ch
Item
Setting operations
Data Encryption
Select [WEP] to use WEP, and
select [Disable] not to use WEP.
Input select
Depending on the setting of [WEP
Key], select ASCII or HEX
(hexadecimal digits), and the
number of characters (digits).
WEP Key 1 to 4
Enter the WEP key (network key).
Note
Windows Vista computers support connection with the
WEP key fixed to 1. Enter the Wep key in the [WEP Key
1] box.
Starting a Wi-Fi Connection
1
Display the Wi-Fi page.
2
Make sure that [Wi-Fi Enable] is set to [Enable] in the
Wi-Fi Status area.
If it is set to [Disable], change the setting to [Enable]
from the camcorder's menu (see page 6).
3
To connect to your computer in ad hoc mode, begin the
connection from the computer (see page 8).
To connect to a wireless LAN, go on to step 4.
4
Click [Search] next to the SSID field in the Wi-Fi
Settings area.
The Wireless Networks list appears.
5
Click the SSID to connect to (network name or
network ID of wireless LAN), and then click [OK].
If the desired SSID is not found
Click [Rescan] to perform the scan again. If it is still
not found, click [Back] to return to the Wi-Fi page (see
the next section "To configure a connection").
6
Enter the network key in the WEP key field, click
[Execute], and then [Reconnect].
Using the Web Menu (For PDW-700/F800 Only)
13
Advertisement
Table of Contents
