Table of Contents
Advertisement
When the connection completes, the connection status
will appear in the Wi-Fi Status area.
To configure a connection
If the desired SSID does not appear on the Wireless
Networks list, enter the SSID and settings (see page 9),
then click [Execute] and then [Reconnect].
Performing IEEE 802.1x
Authentication
Set [802.1X Enable] to [Enable] on the Wi-Fi page in order
to perform IEEE 802.1x authentication.
The authentication settings area appears.
14
Using the Web Menu (For PDW-700/F800 Only)
Authentication settings area
Consult with your network administrator for details about
the authentication settings.
Advertisement
Table of Contents
