Installing The Adiustable Slicing Disc; Adjusting The Slicing Thickness - KitchenAid 5KFP1335 Instructions Manual

Installing the Adjustable
Slicing Disc
IMPORTANT: The adjustable slicing disc
can only be installed in one direction.
I. With the work bowl installed, place the drive
adapter on the power shaft of the base.
TIP: You may need tO turn the disc/drive
adapter until it drops down into place,
4. Install the work bowl cover, being sure it
locks into place.
2. Holding the adjustable slicing disc by
the 2 finger grips, align the pins onto the
adjustable slicing disc adapter into the
L-slots on the disc. Slide the disc down
onto the adapter and turn to engage the
pins in the L-slot.
Adjusting the SEcing
Thickness
Set the desired slicing thickness by moving
the lever to the left for thinner slices or to
the right for thicker slices.
3. Lower the slicing blade and slicing adapter
onto the drive adapter.
NOTE:The !ever on!y works with the
adjustable
slicing disc. Changing
thickness
settings with other discs or blades !nsta!!ed
wilt have no effect on operation.
13