FOOD PROCESSOR INSTRUCTIONS TABLE OF CONTENTS FOOD PROCESSOR SAFETY Important safeguards ....................3 Electrical requirements ..................... 5 PARTS AND FEATURES Parts and accessories ....................6 Selecting the right tools ..................... 8 USING THE FOOD PROCESSOR Attaching the work bowl ..................10 Attaching the lid and safety lock ................
FOOD PROCESSOR SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Food Processor in water or other liquid. 3.
Page 4
FOOD PROCESSOR SAFETY 8. The use of attachments not recommended or sold by itchenAid may cause re, electric shock, or injury. 9. Do not use outdoors. 10. Do not let cord hang over edge of table or counter. 11. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the Food Processor.
ELECTRICAL REQUIREMENTS Voltage: 220-240 Volts Frequency: 50/60 Hertz Wattage: 650 Watts For Brazil only: Voltage:127 Volts Frequency: 60 Hertz Wattage: 780 Watts NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. Do not use an adapter.
PARTS AND FEATURES Parts and accessories 3-piece food pusher with 3-in-1 feed tube Ultratight Seal 4 L Work bowl Externally adjustable blade control Die-cast Accessory case base Stainless steel Dough blade 1 L Mini-bowl multipurpose blade and mini-blade Spatula Egg whip...
Page 7
PARTS AND FEATURES Parts and accessories DICING KIT ➃ Dicing kit lid Externally adjustable slicing disc (thin to thick) 2.4 L Prep bowl ➂ 8mm Dicing kit blade ➁ Dicing kit grid Reversible (2 mm and 4 mm) shredding disc Citrus press ➄...
PARTS AND FEATURES Selecting the right tools Action Setting Food Accessory Vegetables Fruit Fresh herbs Nuts Mince Chop Meat Multipurpose stainless steel blade Mini-bowl and mini multipurpose stainless steel blade Puree Pesto Sauces Cake batter Pie dough Cream Yeast dough Plastic dough blade Knead Fruit (soft)
Page 9
PARTS AND FEATURES Selecting the right tools Action Food Accessory Setting Hard cheese Grate/shave disc Chocolate Grate Shave Potatoes French fry disc Firm vegetables Fries Sticks Potatoes 8 mm dicing kit Tomatoes Onions Cucumbers Dice Fruit Vegetables Eggs Egg whip Whip Citrus fruit Citrus press...
USING YOUR FOOD PROCESSOR Attaching the work bowl Before First Use Before using your Food Processor for the first time, wash the bowls and accessories as described in the “Care and Cleaning” section. Power shaft Be sure the Food Processor is turned off, Place the work bowl on the base as shown.
USING YOUR FOOD PROCESSOR Using the 3-in-1 feed tube Before Use Before operating the Food Processor, be sure the work bowl, blades, and lid are properly assembled on the Food Processor base. Large food pusher Max Fill line on feed tube Use the entire feed tube and the large food pusher to process large items.
USING YOUR FOOD PROCESSOR Using the speed controls NOTE: If the Food Processor fails to operate, make sure the work bowl and lid are properly locked on the base. To turn on, ip the speed lever to “2” To stop, turn the dial to “O” (OFF). (high) or “1”...
Page 13
USING YOUR FOOD PROCESSOR Turn the work bowl and lift to remove, Or turn the lid to unlock, as shown, and and then turn and lift the lid. lift the lid to remove, continuing next steps with bowl still attached to Food Processor.
USING YOUR ACCESSORIES Preparing the dicing kit for rst use IMPORTANT: Follow these directions in order to properly wash all parts of the dicing kit before using it for the first time. Using the handle, place the assembled When placing kit in the work bowl, line dicing kit into the work bowl.
USING YOUR ACCESSORIES Installing/using the dicing kit Place the disc adapter onto the Place the ➁ dicing kit grid, with the grid power shaft. facing front, and line up the kit’s tab with the groove in the work bowl. “CLICK” Place the ➂...
USING YOUR ACCESSORIES Installing/removing the multipurpose blade NOTE: The multipurpose blade has a spill resistant seal and can be left in work bowl, or removed before the contents are emptied. Place the blade on the power shaft. Press down firmly on the blade. You will hear a click when the accessory locks into place.
USING YOUR ACCESSORIES Installing/removing the prep bowl NOTE: The prep bowl can be used only with the discs and the dicing kit. To use the prep bowl, place into the Place the adapter on the power shaft. work bowl using the two finger grips. Place the desired disc on the power Install the lid, aligning the tabs and shaft.
USING YOUR ACCESSORIES Installing/removing the shredding, french fry, and parmesan discs Place the adapter on the power shaft. Slightly rotate the disc until it drops into place onto the adapter. Finger grip Finger grip Install the lid, aligning the tabs and To remove shredding disc and french fry locking it into place.
USING YOUR ACCESSORIES Installing/removing the slicing disc Place the disc on the power shaft. Slightly rotate the disc until it drops into place. Finger grip Finger grip To remove slicing disc, remove lid and Install the lid, aligning the tabs and using the 2 finger grips, lift the disc locking it into place.
USING YOUR ACCESSORIES Installing/removing the mini-bowl and mini-blade Mini-blade Power shaft Place the mini-bowl inside the work Press down firmly on the mini-blade. bowl, making sure the tab on the You will hear a click when it locks mini-bowl lines up with the notch in into place.
USING YOUR ACCESSORIES Installing/removing the citrus press Place the citrus press adapter onto the Place the strainer basket in the work power shaft. bowl with the locking clip positioned to the left of the work bowl handle. Turn the basket counter-clockwise until Place the cone inside the strainer the clip locks into the handle.
USING YOUR ACCESSORIES Installing/removing the egg whip or dough blade Place the egg whip or dough blade onto Press down firmly on the egg whip or power shaft. dough blade. You will hear a click when the accessory locks into place. After processing, firmly grasp egg whip or dough blade and lift straight up.
CARE AND CLEANING IMPORTANT: Never use abrasive cleansers or scouring pads on the Food Processor. They may scratch or cloud the work bowl and cover. Be sure the Food Processor is off and Clean the base and cord with a warm, unplugged before disassembling.
TIPS FOR GREAT RESULTS Using the Multipurpose Blade To chop nuts or make nut butters: Process up to 710 ml (3 cups) of nuts to desired texture, using short pulses, 1 to 2 seconds each time. For a coarser texture, process smaller batches, pulsing 1 or 2 times, 1 to 2 seconds each time.
Page 25
TIPS FOR GREAT RESULTS Using a Slicing or Shredding Disc To slice uncooked meat or poultry, To slice or shred fruits or such as stir-fry meats: vegetables that are long Cut or roll food to t feed tube. Wrap and relatively small in and freeze food until hard to the touch, diameter, such as celery, 30 minutes to 2 hours, depending on...
Page 26
TIPS FOR GREAT RESULTS Helpful Hints • Sometimes slender foods, such as • To avoid damage to the blade or motor, do not process food that is so hard or rmly carrots or celery, fall over in the feed tube, resulting in an uneven slice. To frozen that it cannot be pierced with the tip of a sharp knife.
TIPS FOR GREAT RESULTS • Use the spatula to remove ingredients • If any plastic parts should discolor due to from the work bowl. the types of food processed, clean them with lemon juice • Your Food Processor is not designed to perform the following functions: - Grind coffee beans, grains, or hard spices...