Installing
the
Shredding
Disc
IMPORTANT:
When using the reversible
shredding
disc, have the desired side
(medium!fine)
faring U P.
I. Holding the disc by the 2 finger grips,
insert the disc adapter into the hole in
the bottom
of the disc.
2. Slide the drive adapter into the disc adapter
as far as it wilt go, until it clicks into place.
3. With the work bowl installed, slide the
drive adapter onto the power shaft.
TIP: Yo u may need to turn the d!sc/ddve
adapter until it drops down into place.
B
i- l ' ql!/tl!
4. Install the work
bowl cover,
being sure it
locks into place.
14