Installing The Adiustable Slicing Disc - KitchenAid 5KFP0922 Instructions For Use & Care

Installing the Adjustable
Slicing Disc
The Adjustable Slicing Disc is easily adjusted
and makes slicing tasks simple. Follow
these steps for adjusting and installing the
Adjustable Slicing Disc.
I. Holding the slicing disc, twist the
ridged portion of the shaft clockwise
for thinner slices, or counterclockwise
for thicker slices.
2. With the work bowl installed, hold the
slicing disk by the finger grips and lower it
onto the drive adapter.
TIP" You may need tO turn the disc/drive
adapter until it drops down into place.
Grip
installing the Reversible
Shredding Disc
I. Holding the reversible shredding disc by
the 2 finger grips, insert the shredding
adapter into the hole in the bottom of the
disc.
Finger Grip
2. With the work bowl installed, slide the
drive adapter onto the power shaft.
TIP: Yo u may need to turn the disc/
adapter until it drops down into place.
3. Install the work
bowl cover, being sure it
locks into place.
3. Install the work
bowl cover, being sure it
locks into place.
II