Attaching The Work Bowl Cover; Installing The Adjustable Slicing Disc; Adjusting The Slicing Thickness - KitchenAid KFP1133WH Instructions Manual

ASSEMBLING THE FOOD PROCESSOR CMD + SHIFT CLICK TO CHANGE COPY
Attaching the wor_k bowl cover_
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
Place the work bowl cover on the work
1
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.

Installing the adjustable slicing disc

Hold the slicing disc by the finger grips
1
and lower it onto the drive adapter.
TIP: You may need to turn the disc/drive adapter until it drops down into place.

Adjusting the slicing thickness

Thinner_
Set the desired slicing thickness by moving
the lever to the left for thinner slices or to the
right for thicker slices.
10
2
2
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
Thicker_
will have no effect on operation.
Fit the food pusher into the 3-in-1
feed tube. See "Using the 3-in-1 feed
tube" for details on working with
different sized foods.
Install the work bowl cover, being sure
it locks into place.