Xexun TK102 User Manual

Xexun TK102 User Manual

Gsm/gprs/gps tracker
Hide thumbs Also See for TK102:

Advertisement

Quick Links

GSM/GPRS/GPS TRACKER
MANUAL
U
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.
Make sure to read this manual carefully before using this product. Please note that specification and
information are subject to changes without prior notice in this manual. Any change will be integrated in the
latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
1

Advertisement

Table of Contents
loading

Summary of Contents for Xexun TK102

  • Page 1 GSM/GPRS/GPS TRACKER MANUAL Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.
  • Page 2: Table Of Contents

    Contents 1. Summary ..................................... 3 2. Applications....................................3 3 Hardware Description................................... 3 4 Specs......................................4 5 Usage ......................................5 5.1 SIM card installation ................................. 5 5.2 Battery and Charger................................... 5 5.3 Startup ....................................... 5 5.4 Initialization....................................6 5.41 Reply message with Google link ............................. 6 5.5 Change the password.................................
  • Page 3: Summary

    1. Summary Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. 2. Applications  Vehicle rental / Fleet management etc  Powerful magnet+ water proof, adsorbing in the hidden place of car for tracking secretly. ...
  • Page 4: Specs

    Built-in GSM/GPRS antennas Microphone 3.4 Bottom face 3.5 Interior GSM Card Slot Install the battery like this 4 Specs. Content Specs. Dim. 64mm x 46mm x 17mm(1.8”*2.5”*0.65”) Weight Network GSM/GPRS Band 850/900/1800/1900Mhz GPS chip SIRF3 chip GPS sensitivity -159dBm GPS accuracy Cold status 45s Time To First Fix Warm status 35s...
  • Page 5: Usage

    5 Usage 5.1 SIM card installation Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format. Steps: 5.1.1 Open the rear cover, and pick out the battery. 5.1.2 Push the foil up according the arrow on the foil and load the miscro SD card and push back.
  • Page 6: Initialization

     Put the SIM card and battery in place.  Turn on the unit outdoor by pressing the “on/off” button for 4-5seconds until the indicator is flashing.  For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4 for instruction.) ...
  • Page 7: Authorization

    5.5.2 Be sure keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password. 5.5.3 Make sure the new password is in 6 digits Arabic numbers, or the tracker can not recognize the password.
  • Page 8: Get Geographical Location

    *Tracking location, When GPS signals is weak, the position of latitude and longitude included in the SMS is the position that the tracker received GPS signals at last. If it is different with its exact current location, pay attention to check the time included in the SMS you got. 5.8 Get geographical location 5.8.1 You must set up the APN of your local GSM network for the SIM card in tracker first before using this function, if there is user name and password for GPRS login, Please refer to...
  • Page 9: Monitor (Voice Surveillance)

    5.9.2 Unlimited times auto track: Send SMS “#fix#030s#***n#password#” to the tracker device, it will reply the Geo-info continuously at 30 seconds intervals. 5.9.3 Cancellation: Send SMS “#nofix#password#” to the tracker device. Note: the interval must not less than 20s. 5.10 Monitor (Voice Surveillance) 5.10.1 The command to switch between Track and Monitor are “tracker”...
  • Page 10: Vibration Alarm

    5.12 Vibration alarm It is disabled as default, send “#vibrate#grade level#password#” to tracker (grade level can set 5 levels, 1 is the lowest, 5 is the highest), tracker will reply “vibrate ok!”. “Vibration alarm” will send to authorized phone number when tracker is being shocked, and one alarm for each shock event trigger.
  • Page 11: Overspeed Alert

    5.15 Overspeed alert 5.15.1 Set up: Send SMS:“#speed#password#speed number in 3 digits#” to the unit (suppose the speed is 80km/h), eg, send SMS “#speed#123456#080#”, and it will reply “speed ok!”. When the car moves exceeding 80 km/h, the unit will send SMS alert “speed alarm” to the authorized number .
  • Page 12: Gprs Setting

    5.21.1 Send SMS “#time zone#password#(S)+hour+minute#”. If set OK, it will reply time ok. For example, if in GMT+8, send SMS “#time zone#123456#S0810#”. S represents the set time code , 08 represents different time zone hours of tracking time, 10 represents different minutes. 5.21 GPRS setting User must send SMS via cell phone to set up IP, port and APN before starting GPRS.
  • Page 13: Web Platform And Pc Installation Tracking Software

    5.22.2 Send SMS “#noadminip#password#” to the tracker, it will reply “noadminip ok” and switch to “GSM” mode. 5.22.3 Send IP command to switch to "GPRS" mode. 5.23 Web platform and PC installation tracking software 5.24.1 Web based platform www.gps103.com. Eg, Configuration IP: 202.104.150.75 Port: 9000. 6 Cautions Please comply with the instructions to extend the unit life: 6.1 Keep the unit dry.

Table of Contents