Xexun GPS103AB User Manual
  1. Manuals
  2. Brands
  3. Xexun Manuals
  4. GPS
  5. GPS103AB
  6. User manual

Xexun GPS103AB User Manual

Gsm/gprs/gps portable tracker
Hide thumbs
Table of Contents

Advertisement

Quick Links

GSM/GPRS/GPS Portable Tracker
User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the
device smoothly and correctly. Make sure to read this manual carefully before
using this product. Please note that specification and information are subject to
changes without prior notice in this manual.
Any change will be integrated in the latest release. The manufacturer assumes
no responsibility for any errors or omissions in this document.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GPS103AB and is the answer not in the manual?

Questions and answers

Related Manuals for Xexun GPS103AB

Summary of Contents for Xexun GPS103AB

  • Page 1 GSM/GPRS/GPS Portable Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual.

  • Page 2: Table Of Contents

    Contents Summary ........................1 Applications ........................ 1 Hardware Description ....................1 Specifications ......................2 Quick charger ......................2 Start to use ........................2 Insert SIM card, turn on the device ................ 2 Device status light ....................3 GPRS configuration for live real-time tracking ............4 Mobile APP ......................
  • Page 3 7.14.3 Sleep by time ....................22 7.14.4 Deep sleep by shock ..................22 7.14.5 Schedule report .....................23 7.14.6 Deep sleep by shock + Schedule report ............23 7.15 Check Status ......................23 7.16 Check IMEI ......................24 7.17 Local time setting ....................24 7.18 Reset Hardware....................24 7.19 Configure parameters by USB ................24 7.20 GPRS configuration for live real-time tracking .............25 7.21 Configure SMS monitoring center number ............27...

  • Page 4: Summary

    1 Summary This product is based on the GSM / GPRS network and GPS satellite positioning system. It integrates anti-theft alarm, positioning, auto answer, first aid and tracking functions in a brand new product which can locate or monitor remote targets through SMS text messages or the Internet.

  • Page 5: Specifications

    4 Specifications Content Parameters 85mm x 65mm x 27mm Weight 188g Network GSM/GPRS Band 850/900/1800/1900Mhz GPS sensitivity -165dBm GPS accuracy Cold status GPS start time Warm status Hot status Battery Chargeable 3.7V 5000mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp.

  • Page 6: Device Status Light

    ❶ Open the soft glue plug. ❷ Insert TF card as the picture shows. ❸ Insert SIM Card as the picture shows, and tracker will be turned on automatically. ❹ Cover the soft glue plug After turn on, please bring the device outdoors for the first time to wait for about 10- 40 seconds to search for GSM and GPS signals to start work normally.

  • Page 7: Gprs Configuration For Live Real-Time Tracking

    6.3 GPRS configuration for live real-time tracking Usually, the device can automatically recognize and select the APN, user name and password of GPRS settings. If the device cannot connect to the web platform, then you need to use the mobile phone text message to configure the settings according to following steps.

  • Page 8: Mobile App

    6.4 Mobile APP 6.4.1 Scan the QR code to download APP Google Play、App Store search “BAANOOL IoT” to download it. 6.4.2 Binding device 6.4.2.1 Open BAANOOL IoT, register a new account and login.
  • Page 9 6.4.2.2 Choose BAANOOL IoV to enter it. 6.4.2.3 Click “Me” “Device Management” “Add”, scan the QR CODE on the device or enter the IMEI manually to bind the device Scan QR CODE or enter the IMEI number Click to add the device 6.4.3 Position 1.
  • Page 10 latitude & longtitude, speed, altitude, time, and alarm status, etc. and you can click “Navigate” to navigate you to that car. 2. Select the device: Click “≡” at the upper left corner to select a device, Then its position, Geo-fence and trace (need to configure the “continuously track”...
  • Page 11 single track, continuously track, Arm / Disarm and Geo-fence, etc. Select the device Geo fence Create a new Geo-fence the Geo-fence Click to check the Geo-fence 6.4.5 Device management After selected the device, click “Me” to management page to add device, change device’s information, delete settings, group management and sub-account management.

  • Page 12: Baanool Iot's Web Version

    6.5 BAANOOL IOT’s Web Version Account name and password are the same on mobile App and web version 6.5.1 Register Open http://www.baanool.net to register a new account.
  • Page 13 Click to register Enter IMEI, account, password, mobile phone (For forget password purpose) to finish the registration.
  • Page 14 6.5.2 Login Enter your account and password to login 添加终端 Device management Add device...

  • Page 15: Function Details

    Enter IMEI Device name Choose an icon for device Click to save it This device you just added is still offline If the device is always offline (Grey color), please make sure the SIM card subscribes the GPRS service, and have credit to surf the Internet, you can put the SIM card in the phone to test if it can surf the Internet.

  • Page 16: Authorization

    When reading this user manual, you will notice that we have used "+" and "space" between some words;"+" between two words means they should be written together as one word and "space" between two words means you should leave one character space between two words.

  • Page 17: Continuous Interval Tracking

    location as below: When it lost fix to satellites, the message will include the last known GPS position and a LAC code of the updated position as well. 7.4 Continuous interval tracking 7.4.1 Limited times tracking at a time interval SMS command: fix030s600s005n+password Tracker response: It will update positions at 30 seconds interval when moving and 600 seconds for 5 times when motionless.

  • Page 18: Unlimited Times Tracking At A Distance Interval

    Note: The time interval must be more than 10 seconds. 7.4.3 Unlimited times tracking at a distance interval SMS command: Distance+password+space+distance value Tracker response: Distance ok Example: Distance123456 0050 Note: The distance unit is meter, and value must be 4 digits. 7.4.4 Smart tracking at both time and distance interval SMS command: fix030s600s***n+password+space+distance value Tracker response: It will update a position at 600 seconds interval when...

  • Page 19: Gps Drift Suppression

    7.6 GPS drift suppression This function is deactivated by default. SMS command to activate: suppress+password Tracker response: suppress drift ok Example: suppress123456 If you stop driving the vehicle, tracker will stop updating its position and keep sending the same latitude and longitude, and when start to driving, the latitude and longitude will update automatically again.

  • Page 20: Auto Answer

    7.9 Auto answer Track is the default mode for position. SMS command to switch to auto answer mode: monitor+password Tracker response: monitor ok! Example: monitor123456 Note: If there aren’t any authorized numbers set-up, it will auto answer for all the incoming calls, if there are authorized numbers set-up, it will auto answer the incoming calls from authorized numbers and reject all other phone numbers.

  • Page 21: Configure Times Of Alarm Sms

    number, which is 10086 in this example of China Mobile. Received and execute Send ye out to 10086 balance123456 10086 ye Mobile Tracker 10086(China mobile) Send balance back Forward balance message to mobile phone Received ye from number in the Received Balance message tracker and process 7.12 Configure times of alarm SMS...

  • Page 22: Geo-Fence

    gps+latitude & longtitude of the last know position.” to authorized numbers if lost fix to GPS satellites. SMS command to activate: gpssignal +password+space+on Tracker response: gpssignal on ok Example: gpssignal123456 on SMS command to deactivate: gpssignal +password+space+off Tracker response: gpssignal off ok Example: gpssignal123456 off 7.13.3 Geo-fence The Geo-fence feature creates a virtual fence.

  • Page 23: Over Speed Alarm

    Tracker response: move ok! Example: move123456 0200 SMS command to deactivate: nomove+password Tracker response: nomove ok Example: nomove123456 Note: The unit of the radius value is meter, and the value must be 4 digits and maximum 9999 meters. To configure the movement alarm, the tracker must fix to satellites and be stationery for about 3-10 minutes.

  • Page 24: Sleep

    Example: noshock123456 Sensor’s sensitivity configuration There are three different levels. First level: Alarm will be triggered by slight vibration. SMS command: sensitivity+password+space+1 . Tracker response: sensitivity ok Example: sensitivity123456 1 Second level: Alarm will be triggered by medium vibration. SMS command: sensitivity+password+space+2 Tracker response: sensitivity ok Example: sensitivity123456 2 Third level: Alarm will be triggered by severe vibration.

  • Page 25: No Sleep (Always Online)

    7.14.1 No sleep (Always online) SMS command: sleep+password+space+off Tracker response: sleep off ok Example: sleep123456 off Tracker does not sleep, GSM and LED light work at all times. GPS module will be off intelligently according to the track interval when there is no need to update positions or when motionless.

  • Page 26: Schedule Report

    7.14.5 Schedule report SMS command: schedule+password+space+1h Tracker response：schedule ok！ Example: schedule123456 1h It will wake up every one hour, and automatically send location message after wake up. (m: minute; h: hour; d: day). The maximum interval value is 3 digits, and it cannot longer than 30 days.

  • Page 27: Check Imei

    7.16 Check IMEI SMS command: imei+password Tracker response: xxxxxxxxxxxxxxx (A 15 digits IMEI of your device) Example: imei123456 7.17 Local time setting Tracker works in the local time zone by default. If you find that the time zone is incorrect, you can configure the time zone. SMS command: time+space+zone+password+space+time zone value Tracker responds: time ok Example: time zone123456 8...

  • Page 28: Gprs Configuration For Live Real-Time Tracking

    7.20 GPRS configuration for live real-time tracking 7.20.1 Configure APN, GPRS login user name and password Usually, tracker can automatically recognize and select the APN and GPRS’ user name and password without any configuration. If it cannot connect to the network, Please configure it according to following steps.
  • Page 29 7.20.2 Configure domain name and port Tracker connects to tracker.baanool.net:8090 by default. If you need to connect to another domain name, please configure it. SMS command: dns+password+space+DNS domain name+space+port Tracker response: dns success! Example: dns123456 04.GPSTrackerXY.com 9000 Note: 123456 is tracker’s password, 04.GPSTrackerXY.com is the DNS, 9000 is port.

  • Page 30: Configure Sms Monitoring Center Number

    7.20.3.2 SMS mode Switch to SMS mode will disconnect the GPRS connection for live tracking. SMS command: SMS+password Tracker response: SMS OK! ( It means it has been switched to SMS mode.) Example: SMS123456 7.21 Configure SMS monitoring center number SMS command: centernum+password+space+phone number Tracker response: centernum ok Example: centernum123456 13322221111...

  • Page 31: Initialization

    7.23 Initialization If the tracker cannot work properly, you can send command to initialize it to return to default factory settings. SMS command: begin+password Tracker response: begin ok Example: begin123456 8 Cautions Please be sure to follow when using: 1. Keep the tracker used in a dry environment. The humid environment can easily damage internal circuits.
  • Page 32 No response for 1. No credit on SIM card. SMS command The format of the SMS command is incorrect. 1. Did you have set up the authorized phone number? No response for a 2. If authorized number exists, did you make the call from an call authorized phone number? No alarm...

Table of Contents