Xexun tk201-2 User Manual

Xexun tk201-2 User Manual

Gsm/gprs/gps mini tracker

Advertisement

Quick Links

GSM/GPRS/GPS MINI TRACKER
USER MANUAL
Preface
Thank you for purchasing the Mini Gp s Tracker. This manual shows how to operate
the device smoothly and correctly. Make sure to read this manual carefully before
using this product. Please note that specification and information are subject to
changes without prior notice in this manual. Any change will be integrated in the latest
release. The manufacturer assumes no responsibility for any errors or omissions in
this document
1

Advertisement

Table of Contents
loading

Summary of Contents for Xexun tk201-2

  • Page 1 GSM/GPRS/GPS MINI TRACKER USER MANUAL Preface Thank you for purchasing the Mini Gp s Tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual.
  • Page 2: Table Of Contents

    Content 1 Summary ---------------------------------------------------------------------------------- 2 Application --------------------------------------------------------------------------------- 3 Hardware Description 3.1 Front Face -------------------------------------------------------------------------------------- 3.2 Rear Face -------------------------------------------------------------------------------------- 3.3 Side Face -------------------------------------------------------------------------------------- 3.4 Interior --------------------------------------------------------------------------------------- 4 Specifications ---------------------------------------------------------------------------------------- 5 Usage SIM card installation ----------------------------------------------------------------------- Charger and charging ------------------------------------------------------------------------ Startup ---------------------------------------------------------------------- Initialization ---------------------------------------------------------------------- Change the Password...
  • Page 3: Summary

    1 Summary Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS. 2 Applications Protect the child / the old / the disabled / pet etc Personnel management Covert Tracking 3 Hardware Description Accessories including Color box,Belt,Built-in battery,Wall charger,Indoor charger and...
  • Page 4: Interior

    3.4 Interior Battery connector USB connector for Battery connector Built-in battery SIM Card slot updating software 4 Specs. Content Specs. Dimension. 46(L)x39(W)x13(H) mm Weight Network GSM/GPRS Band 850/1800/1900Mhz or 900/1800/1900Mhz GPS chip SIRF3 chip GSM/GPRS Enfora module module GPS sensitivity -159dBm GPS accuracy Cold status 45s...
  • Page 5: Usage

    5 Usage 5.1 SIM card installation Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format. Steps: 5.1.1 Open the back cover by loosen the screws 5.1.2 Push the foil back and pull it up.
  • Page 6: Charger And Charging

    5.2 Charger and charging Put the tracker into the slot for charging directly Charging connector Connecting here with wall charger The indicator is green for charging. means charging while red means full charged. Power on/off button of the charger Do charge the battery to capacity in 8 -12 hours for the first use. Please use the battery and charger provided by the manufacturer.
  • Page 7: Startup

    5.3 Startup Put the SIM card in place and tighten the screws.. The unit turns on automatically when connecting the tracker with battery,at this time the indicator keep flashing quickly. In 30s to 60 seconds the indicator stop flashing when the unit receives GSM signal as well as GPS signal.
  • Page 8: Authorization

    5.6 Authorization There are only 5 numbers able to be authorized. 5.6.1 Setup:Send SMS admin+password+space+cell phone number to be as a authorized number. The other authorized numbers should be set up by the first authorized number. If the number is successfully authorized, the unit will reply SMS. “admin ok!”.
  • Page 9: Geo-Fence

    30s,total 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits and at maximum 255 in value. 5.8.2 To get a Geo-info at 30s intervals to the authorized numbers for heaps of times. Setup:Send SMS t030s***n+password to the unit, it will report a Geo-info every 30s,total heaps of times.
  • Page 10: Movement Alert

    5.10 Movement Alert This function is using for the owner to get alarm when the unit moves out of a restricted district.(500m radius). 5.10.1 Setup: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS move+password to the unit, it will reply “move ok!”. In case of such a movement, it will send a SMS “Move”...
  • Page 11: Low Battery Alert

    below that rate, it may cause the excursion of the GPS signal influenced by clounds etc. 5.12 Low battery Alert It begins to send SMS to the user every 30 minutes when the battery voltage is or less than 3.7V. The alert SMS format as below: lat: 22.566923 long: 114.051331 speed:0.00 28/10/09 03:33 L:3.68V,0, Signal:F imei:359587011016261 05 41.9...
  • Page 12: Gprs Setting

    5.15 GPRS Setting In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by cell phone. ( NOTE: Some countries or regions should set APN’s User Name and APN’s Password,please consult your local for information.)...
  • Page 13 As soon as the IP & Port & APN are set up, the user can make a call or send SMS to tracker. The tracker will hang up and report the coordinates to IP address. The message format sent by tracker to IP address is as following: Serial number + authorized number + GPRMC + GPS signal indicator + alert command + IMEI number +Battery voltage+ Number of satellites + CRC16 checksum.
  • Page 14: Cautions

    6 Cautions Please comply with the instructions to extend the unit life: 1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry. 2. Don’t use & store the unit in dusty places. 3. Don’t put the unit in overheated or overcooled places. 4.

Table of Contents