Advertisement
REMOVING OR INSTALLING THE JOINTER
CAUTION :
Always be sure that the tool is switched off and unplugged before removing or installing
the jointer.
The jointer can be easily removed from the auto-planer. You can carry it by yourself.
1. Removing the jointer
Loosen the right and left knobs. Pull the
jointer toward
you as
shown in the
figure. The jointer can be removed.
When the jointer is removed, the pulley
cover will close automatically.
If
you
lock the pulley cover in the open posi-
tion for some reason, be sure to close it
by pushing the release button before
operating the auto-planer. Never operate
the auto-planer with the pulley cover
locked in the open position.
2. Installing the jointer
Open the pulley cover until it will be
locked. Align the line on the pulley with
the pointer on the side cover (L).
-
Knob
I
Side
cover ( L )
Pulley cover
/--
,-Poi n ter
/ = I
'
Line
\L'
Pulley
\ \ \
-
..
.
19
Advertisement
