Seat Post Insert Replacement - Matrix U7XE-03 Service Manual

CHAPTER 9: PART REPLACEMENT GUIDE

9.9 SEAT POST INSERT REPLACEMENT

1) Remove the seat adjustment pin (Figure A).
2) Pull the seat post upward until the stem comes away from the frame and set it aside (Figure B).
FIGURE A FIGURE B
3) Remove the rubber boot that rests at the bottom of the seat post (Figure C).
4) Grab the lip of the seat post insert and remove it from the seat post (Figure D).
FIGURE C FIGURE D
5) Reverse Steps 1-4 to install a new seat post insert.
45