Motorola AP-7131 Installation Manual page 31

the WAN connection, even when there is no traffic. If the ISP drops the connection after
the idle time, the AP-7131 automatically reestablishes the connection to the ISP.
b. Specify a Username
begins, the ISP authenticates the username.
c. Specify a Password
starts, the ISP authenticates the password.
7. Click the LAN tab to set a minimum set of parameters to use the AP-7131 LAN interface.
a. Select the Enable LAN Interface
LAN connection. The LAN connection is enabled by default.
b. Use the This Interface
defined over the AP-7131's LAN connection. Select
network uses DHCP. DHCP is a protocol that includes mechanisms for IP address
allocation and delivery of host-specific configuration parameters from a DHCP server to
a host. Some of these parameters are IP address, network mask, and gateway. Select
DHCP Server
c. Enter the network-assigned
d. The Subnet Mask
the network domain, the next set specifies the subset of hosts within a larger network.
These values help divide a network into subnetworks and simplify routing and data
transmission.
e. Enter a Default Gateway
Ethernet as its default gateway.
f. Enter the Primary DNS Server
g. If using DHCP Server, use the
range of IP address reserved for mapping clients to IP addresses. If a manually (static)
mapped IP address is within the IP address range specified, that IP address could still be
assigned to another client. To avoid this, ensure all statically mapped IP addresses are
outside of the IP address range assigned to the DHCP server.
For additional AP-7131 port configuration options, as well as radio, WLAN
NOTE
and Quality of Service (QoS) options, refer to the
AP-7131 Product Reference Guide.
8. Enable the radio(s) using the
enable the radio, then select either 802.11a/n (5 GHz) or 802.11b/g/n (2.4 GHz) from the
entered when connecting to the ISP. When the Internet session
entered when connecting to the ISP. When the Internet session
checkbox to forward data traffic over the AP-7131
drop-down menu to specify how network address information is
to use the AP-7131 as a DHCP server over the LAN connection.
IP Address
defines the size of the subnet. The first two sets of numbers specify
to define the IP address of a router the AP-7131 uses on the
IP address.
Address Assignment Range
Radio Enable
Basic AP-7131 Configuration
DHCP Client
of the AP-7131.
parameter to specify a
checkbox(es). If using a single radio model,
if the larger corporate
RF
27