Channel Menu - Memorex MLT4352 Owner's Manual

Channel Menu (must be in TV Mode)
Antenna
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal :
1 Press the MENU button to bring up the On-Screen menu.
2 Press the t/u buttons to select Channel.
3 Press the q button to select a setting (i.e. Antenna, etc.).
4 Press the t/u buttons to adjust the setting, or press the OK
button to enter certain settings.
5 Press the t/u buttons to adjust the setting.
6 When done, press the EXIT button to exit the menus or press
the MENU button to return to the previous menu.
ANTENNA: Select Air (if using an antenna) or Cable (if using cable).
AUTO SCAN: This will start Auto Scanning the channels and will save any strong
broadcasting channels for easy selection using the Channel Up/Down buttons.
FAVORITE: Enter your favorite channels on this screen.
SHOW/HIDE: Select which channels will be shown or hidden. Select Show for a
channel that was not recognized in Auto Scan. Select Hide to skip a channel previously
recognized in Auto Scan.
CHANNEL NO.: Select a Channel Number to show or hide directly from the menu.
CHANNEL LABEL: Allows you to change the channel labeling and name them as
desired.
DTV SIGNAL: Displays the signal intensity of Digital TV programming.
ON SCREEN DISPLAY
Select
Air
Move
MENU
- 33 -
Return