On Screen Display; Picture Menu - Memorex MLT4352 Owner's Manual

Picture Menu

Picture Mode
Contrast
Brightness
Saturation
Tint
Sharpness
Advanced Video
1 Press the MENU button to bring up the On-Screen menu.
2 Press the t/u buttons to select Picture.
3 Press the q button to select a setting (i.e. Picture Mode, etc.).
4 Press the t/u buttons to adjust the setting, or press the OK
button to enter certain settings.
5 When done, press the EXIT button to exit the menus or press
the MENU button to return to the previous menu.
PICTURE MODE: Set the desired Picture Mode (Standard, Dynamic, Soft, Personal).
Select Personal to adjust the individual picture sliders manually.
CONTRAST: Set the desired contrast (the difference between the bright and dark regions of
the screen picture).
BRIGHTNESS: Set the desired brightness.
SATURATION: Set the desired saturation.
TINT*: Set the desired tint.
SHARPNESS: Set the desired sharpness.
ADVANCED VIDEO: Press the u button to enter the advanced setting, as described on the
next page.
* The Tint option is only available when in NTSC mode.

ON SCREEN DISPLAY

Select
Personal
Move
MENU
- 20 -
5 0
5 0
5 0
5 0
5 0
Return