Channel Menu - Memorex MT2025D Owner's Manual

Here describes the case for searching and memorizing channels for DTV/ATV.
MUTE
Q.VIEW INFO
INPUT
1 2
4 5
7 8
SAP
0
OK
CH+
VOL
MENU
-
CH-
CC SLEEP
GUIDE ARC
EXIT
FULL/AUTO SCAN (DTV/ATV)
(When using antenna)
The channels broadcasted in DTV and ATV are
automatically scanned and memorized. Only the
TV/DTV
receivable channels in the area where this TV is
used will be memorized.
3
6
FULL/AUTO SCAN (CATV)
9
P.MODE
(When using basic cable)
- The channels broadcasted in CATV are automatically
scanned and memorized.
NOTE:
VOL
Be sure that antenna or cable is connected properly before plugging the
+
power cord.
1
Press MENU, and then press VOL+/- button to select
S.MODE
CHANNEL menu, then press CH- button to enter.
CH.LIST
2
Press CH+/- button to
select the RECEPTION
option.
3
Press VOL +/- button
to select AIR/ CABLE.
4
Press CH +/- button
to select AUTO SCAN option.
5
Press VOL+ button to start scanning.
When you press VOL+ on the remote control,
scanning the channels in both analog and digital
modes will automatically start.
When scanning is completed, the memorized
smallest channel will be displayed.
When you press MENU button while scanning, the
scanning is interrupted and the memorized smallest
channel is displayed.
SKIP
RECEPTION
AUTO SCAN
COLOR SYSTEM
12

Channel menu

CHANNEL
OFF
ATV AIR
AUTO
Only in analog signal
0101