Changing The Edge Clearance (When Operating With Guide Rails); Maintenance; Repair; Accessories - Senco SNS50 Instruction Manual

3.5.4 Changing the edge clearance
(when operating with guide rails)
Tools required:
By default the stapler is set at an edge clearance of 14
mm. This distance is perfect for fastening chipboard and
OSB-panels.
To process Fermacell panels an edge clearance of 5 mm
is necessary. By carrying out a simple modification of the
guide panels, this edge clearance can be set.
Guide panels
Illustration 3.5.4./1: Modification of the guide panels (shown
here: Setting for 1 mm edge clearance)
Carry out the following steps:
1. Loosen the screws labelled (using arrows) in illustration
3.5.4/1 from the upper side.
2. Turn the guide panels by 90° respectively.
3. Tighten the screw loosened in step 1. Take care that
the longer screws (M5 x 25) are inserted at the outlet
side of the base panel. The guide roller brackets are
fixed at the same time (see chap. 3.5.1).
4. This concludes the modification.

MAiNTENANCE

Adhere to the stipulated maintenance interval to guarantee
continuous fault-free operation:
Daily:
● Empty the moisture trap on the maintenance unit of the
compressed air supply
● Check that all screws and nuts are tight
● Make sure the trigger system is working perfectly

REPAiR

Repairs to the pressure tank may only be conducted by ex-
perts approved by the manufacturer or other experts using
the original Poppers replacement parts.
● 1 Allen key 4 mm
(included in delivery)

ACCESSORiES

We supply the following listed accessories for the stapler
„Wegmatik":
Designation
Switch cam for staple spacing 45/90 mm
Switch cam for staple spacing 60/90 mm

WARRANTY

The system was developed and manufactured according
to the latest technical developments. We give the initial
purchaser a warranty on operation, material and process-
ing in line with legal regulations. Normal wear and tear is
excluded from the warranty.
The warranty becomes invalid when incorrect handling, use
of violence, repair by a third party and instalment of parts
other than the original replacement parts comes to light.
The warranty extends to repair or exchange at our choice.
There is no warranty beyond the scope of our delivery, as
we have no influence on the correct and professional use of
the system.
Please observe our company terms and conditions!

DiSPOSAL

Bring the system, packaging and accessories
to an environmentally compatible recycling
facility.
(According to directive 2002/96/EG from the
European parliament and the council from 27
January 2003).
Order No..
EJ0132F
EJ0132L
9