Power Over Ethernet Module For Futro X913/X913-T (Optional) - Fujitsu ESPRIMO X913 Operating Manual

Power over Ethernet module for FUTRO
X913/X913-T (optional)
Ethernetmodule
Your FUTRO can be equipped with an optional Power over Ethernet module.
Using the Power over Ethernet adapter, you can operate the FUTRO via the LAN without an
additional power connection. To do this, you will need a corresponding network infrastructure.
To operate the FUTRO via the Power over Ethernet adapter, midspan devices (power supply via
intermediary sources, such as PoE injector) with a power output of 60 W and shielded CAT-5
network cable or higher quality cable are required. Endspan devices (direct power supply via
a PoE switch) are only supported in connection with a hardware classification.
Fujitsu recommends the use of the following midspan devices:
• 1-port midspan from Microsemi PD-9501G: S26361-F1744-L10
• 12-port midspan from Microsemi PD-9512G: S26361-F1744-L20
When operating the FUTRO via the Power over Ethernet adapter, the external
USB power output is limited to max. 5 watts.
Fujitsu
Operation
47