Typical Stove System - Quadra-Fire YOSEMITE-MBK Owner's Manual

Yosemite Wood Stove
H. Typical Stove Systems
Stove system with masonry chimney
consists of: Figure 8.1
• Stove
• Chimney Connector (stove pipe)
• Thimble
• Masonry Chimney
• Hearth Pad Floor Protection
Stove system with prefabricated metal
chimney consists of: Figures 8.2 and 8.3
• Stove
• Chimney Connector
(stove pipe)
• Thimble (for exterior
chimney)
• Firestops
• Insulations Shields
• Storm Collar and Flashing
• Termination Cap
• Hearth Pad Floor Protec-
tion
Listed Cap
Maintain 2" (51mm)
Clearance Through Eave
Flashing
*
Combustible
Ceiling
Chimney
Connector
*
*
Floor
Protector
Figure 8.2 Exterior Prefabricated Chimney
Page 8
Combustible Outside Wall
Listed
2" (51mm)
Chimney Pipe
Clearance
Chimney
Listed Chimney
Connector
To Stove
Insulated "T"
Wall Support
Trim Collar
Wall Spacer on
on Inside
Outside Wall
Wall
Insulated "T"
Combustible Wall
*
Refer to Clearances to Combustibles
Spark Arrestor Cap
Concrete Cap
1 in (25mm) Clearance
With Firestop
Ceiling Joist
Combustible Wall
Thimble,
12 in (305mm)
Of Brick
Floor
Protector
Figure 8.1 Masonry Chimney
Maintain 2" (51mm)
Clearance
Listed Chimney
Ceiling Support
Chimney
Connector
Floor
Protector
Figure 8.3 Interior Prefabricated Chimney
7004-187L
Fireclay Flue Liner
With Air Space
Rafter
Flashing
Eave
Sheathing
Outside Air Rear Vent
Outside Air
Termination Cap
Airtight
Cleanout Door
Listed Cap
Combustible
Storm Collar
Ceiling
Joists
Flashing
Chimney
Connector
Combustible Wall
*
*
Refer to Clearances
to Combustibles
*
October 13, 2015
R
Listed
Chimney
Attic
Insulation
Shield
Specified
Clearance
Ceiling
Support
To Stove