Mantis 7990 Operator's & Parts Manual page 7

Picture of Model 7990
T67
T40
T14 T10
T11
T15
T6
T7
WHAT COMES IN THE BOX
Key Qty. Part No. Description
T21, 1
T20,T52
T10 1
T11 1
T14 1
T6 1
T7 1
T16 2
T48 6
T15 1
T49 4
T1 1
T2 1
T8 1
T53 2
T42 2
T47 2
T13 2
T39 1
T40 1
T66 1
T67 1
T41 4
T59 1
T60 1
Oil 1 400208
T21 T20 T52
T66
T39
T8
OIL
T1
T60
T2
Engine Assembly (includes Fender Guard &
Worm Gear Transmission)
Loop Handle, Right Half
Loop Handle, Left Half
Foam Grip
Lower Handle with Plug, Right
Lower Handle with Plug, Left
Bolt 1/4-20 X 3.25"
1/4-20 Two-Way Lock Nut
Carry Handle with Grip
1/4-20 X 1.125" Hex Head Cap Screws
Trigger Handle Assembly, 4-Cycle Engine,
Right
Handle Assembly, Left
Handle Brace
Knob, Two Prongs, Female
Carriage Bolt, 1/4-20 X 2.25"
Acorn Nut
Throttle Clip
Tine Assembly, Outer Right
Tine Assembly, Outer Left
Tine Assembly, Inner Right
Tine Assembly, Inner Left
Tine Retaining Pins
Kickstand, Stand Assembly
Kickstand, Bracket and Hardware
4-Cycle Oil 3.4oz
Contact us at www.mantis.com
Improper assembly of this tiller can result in serious injury. Make
sure to follow all instructions carefully. If you have any questions,
contact our factory at 1-800-366-6268 or an authorized Mantis dealer.
Bag Contents
T59
T13
WHAT YOU WILL NEED
TO ASSEMBLE THE TILLER
Prior to removing the contents and assembling, it is important to:
• Have a clean work area
• Make sure all necessary
tools are handy
• You will need a 7/16"
crescent wrench
T53
T14
T42
T41
T49
T59
• A ratchet wrench with
an extension
• A 7/16" socket
• A 3/8" socket or
crescent wrench
Assembly
T16
T47
T48
T60
7