Table of Contents
Advertisement
2: Mainboard Installation
Install Memory
The mainboard has one DIMM socket for system memory modules.
DIMM1
For this mainboard, you must use 168-pin, 3.3V unbuffered PC100
or PC133 SDRAM memory modules. You can install any size
memory module from 8 MB to 256 MB, and the maximum
memory size is 256 MB.
The edge connectors on the memory modules have cut outs, which
coincide with spacers in the DIMM socket so that memory
modules can only be installed in the correct orientation.
To install a module, push the retaining latches at either end of the
socket outwards. Position the memory module correctly and insert
it into the DIMM socket. Press the module down into the socket so
that the retaining latches rotate up and secure the module in place
by fitting into notches on the edge of the module.
9
Advertisement
Table of Contents
