Optional Extension Brackets - ECS EVEm Series User Manual

1. Select the PCI slot.
2. Remove the expansion slot cover from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down until fully inserted.
4. Secure the expansion card bracket in the system chassis by
using the screw that holds slot cover in place.

Optional Extension Brackets

For this mainboard, you can also obtain an AV/S-Video output
module and a Flash Disk module. Install the extension by
following the steps below.
AV/S-Video Output Module
This module has an AV jack and a S-Video jack for the television
out.
JP10
1. On the mainboard, locate the TV header JP10 for this module.
2. Plug directly the module into the TV header.
3. In the system chassis, use the screw that holds blanking plate
to secure the module.
2: Mainboard Installation
17