Table of Contents
Advertisement
Resources
You should leave this item at the default Auto
Controlled By
(ESCD). Under this setting, the system
IRQ Resources/
dynamically allocates resources to plug and
DMA Resources
play devices as they are required. If you
cannot get a legacy ISA (Industry Standard
Architecture) expansion card to work properly,
you might be able to solve the problem by
changing this item to Manual, and then
opening up the IRQ Resources and Memory
Resources sub-menus.
In the IRQ Resources sub-menu, if you change
any of the IRQ assignations to Legacy ISA,
then that Interrupt Request Line is reserved for
a legacy ISA expansion card. Press Esc to
close the IRQ Resources sub-menu.
PCI/VGA
This item is designed to overcome some
problems that can be caused by some non-
Palette Snoop
standard VGA cards. This board includes a
built-in VGA system that does not require
palette snooping so you must leave this item
disabled.
3: BIOS Setup Utility
35
Advertisement
Table of Contents
