Machine Care; Maintenance And Care - Bissell lift-off 94Y2 SERIES User Manual

M
aintenance and care
Machine care (check regularly)
Cleaning suction gate
The suction gate automatically diverts
air when the portable deep cleaner
is detached. This should be checked
and cleaned regularly for any dirt and
debris.
1.
Step on the pedal and remove the portable
spot cleaner. Remove dirty tank.
2.
Remove two screws and pull off
suction gate door.
3.
Wipe suction gate clean and rinse
suction gate door.
4.
Replace suction gate door and two screws.
Cleaning spray tips
1.
Step on the pedal and remove the portable
spot cleaner. To remove, push in tab and pull
it out.
2.
Clean by rinsing under hot water.
3.
Replace by snapping back in.
4.
Repeat steps on second spray tip.
Cleaning solution filter
1.
Step on the pedal and remove the portable
spot cleaner. Remove the red solution filter
cap on the base of the machine by inserting
a coin or a flat head screw driver into the
slot on the top.
2.
Turn counter clockwise to unscrew. Set aside.
3.
Remove the white filter by the post. Rinse the
filter under water.
4.
Replace the white filter back into the filter
area.
Note: Make sure the white filter is seated properly
before replacing the red solution filter cap.
5.
Replace the red solution filter cap and turn
clockwise to tighten.
w w w . b i s s e l l . c a
WARNING:
To reduce the risk of fire, electric
shock, or injury, turn power OFF and
disconnect plug from electrical outlet
before performing maintenance or
troubleshooting.
2.
Suction
Gate
Spray
Tips
1.
2.
Solution
Filter Cap
3.
5.
Filter
13
8 0 0 . 2 6 3 . 2 5 3 5