Portable Spot Cleaning Mode; Filling Tank; Preparing The Machine - Bissell lift-off 94Y2 SERIES User Manual

O
perations

Portable spot cleaning mode

Preparing the machine

1.
Step on the portable spot cleaning pedal to
release the portable spot cleaner.
2.
Release fl ex hose by twisting the hose
secure latch clockwise. Unwrap fl ex hose
completely.
3.
Attach the desired tool to the hose grip until
it snaps together. Make certain the tool is
securely attached.
4.
Twist the Quick Release cord wrap clockwise
to unwrap the power cord completely and
plug into grounded outlet.

Filling tank

1.
Fill the tank with hot tap water to the
portable water fill line. Add 1/2 capful.
(1.25 ounces) of BISSELL 2X formula to the
tank.
Cleaning with Tools:
1.
Hold the tool approximately 1" above the
soiled surface. Press the spray trigger to
apply the cleaning solution to the soiled
area.
Note: Hold end of hose below the tank water level to
help prime the portable spot cleaner.
2.
Using the brush on the tool, gently scrub the
area to be cleaned.
3.
Apply downward pressure on the tool and
pull it toward you. The suction will remove
the dirt and cleaning solution. Continue until
no more dirt can be removed.
w w w . b i s s e l l . c a
IMPORTANT
IMPORTANT! If using to clean upholstery, check
upholstery tags. Check manufacturer's tag before
cleaning. "W" or "WS" on the tag means you can use
your Lift off Deep Cleaner if the tag is coded with an
"X" or an "S"(with a diagonal stripe through it), or
says "Dry Clean Only", do not proceed with any deep
cleaning machine. Do not use on velvet or silk. If
manufacturer's tag is missing or not coded, check with
your furniture dealer.")
Manufacturer's tag
IMPORTANT
Check for colourfastness in an inconspicuous place.
If possible, check upholstery stuffing. coloured
stuffing may bleed through fabric
Tip:
The same formula can be used
in upright and portable mode
11
8 0 0 . 2 6 3 . 2 5 3 5