Bissell POWERGLIDE User Manual

Bissell POWERGLIDE User Manual

With lift-off technology
Hide thumbs Also See for POWERGLIDE:

Advertisement

2763, 9182 SERIES
*Product images may vary

Advertisement

Table of Contents
loading

Summary of Contents for Bissell POWERGLIDE

  • Page 1 2763, 9182 SERIES *Product images may vary...
  • Page 2: Safety Instructions

    If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. www.bissell.com 800.237.7691...
  • Page 3: Table Of Contents

    Thanks for buying a BISSELL vacuum Safety Instructions... 2 We’re glad you purchased a BISSELL vacuum. Everything we know about Product View....4...
  • Page 4: Product View

    To reduce the risk of electric shock, turn danger of suffocation, keep away from you are familiar with all instructions and power switch off and disconnect polarized babies and children. operating procedures. plug from electrical outlet before performing maintenance or troubleshooting checks. www.bissell.com 800.237.7691...
  • Page 5: Attach Handle To Vacuum

    800.237.7691...
  • Page 6 The discharges are entirely place before removing pod or when using tools. harmless and are not associated in any way Placing the vacuum in its full upright with the main power supply. position automatically stops the rotating brush. www.bissell.com 800.237.7691...
  • Page 7: Power Cord Storage

    1. To move your vacuum cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward. 2. The vacuum can also be transported by grasping the carry handle on the lift-Off vacuum pod. www.bissell.com 800.237.7691...
  • Page 8: Maintenance & Care

    Twist the cyclone counter-clockwise to unlock and pull straight down to remove. 2. The inner cyclone and dirt tank may be wiped clean with a damp cloth. Make sure all parts are dry before replacing. www.bissell.com 800.237.7691...
  • Page 9: Replacing The Post-Motor Filter

    BISSELL model series notE: the post-motor filter is a pleated filter. 2763 and 9182 vacuums. this filter is not washable and must be replaced For ordering information, when it becomes dirty.
  • Page 10 Remove any debris from this area. 7. Clean debris from the motor pulley and drive belt areas. 8. Check drive belt carefully for wear, cuts or stressed areas. if any damage is present, discard old drive belt and replace. www.bissell.com 800.237.7691...
  • Page 11: Replace Drive Belt

    Pulley space between the bristles. notE: It is important that you use only genuine bISSEll replacement belts. Generic belts may not meet the exacting specifications required to keep your vacuum operating at its peak performance. the use of unbranded belts could...
  • Page 12: Clearing Clogs

    7. if the low suction persists, follow the instructions for checking the rotating brush on page 10 and inspect the air passageway for obstructions. 8. Check all filters for clogs, per instructions on page 9. www.bissell.com 800.237.7691...
  • Page 13: Troubleshooting

    Thank you for selecting a bissell product. this product for any questions or concerns, bISSEll is happy to to the store. be of service. contact us directly at 1-800-237-7691. www.bissell.com 800.237.7691...
  • Page 14: Replacement Parts

    Deluxe Bare Floor Tool 160-1963 Pet Hair Fabric Tool 203-2447 TurboBrush® Tool 160-1510 Pet TurboEraser® Tool Febreze and related trademarks are owned by the Procter & Gamble Company, Cincinnati, Ohio and used under license by Bissell Homecare, Inc. www.bissell.com 800.237.7691...
  • Page 15: Warranty

    BISSELL Consumer Care. limited five-year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon Website or E-mail: receipt of the product BISSELL will repair or replace (with new or www.bissell.com remanufactured components or products), at BISSELL’s option, free or call: of charge from the date of purchase by the original purchaser, for five years any defective or malfunctioning part.
  • Page 16: Product Registration

    10am - 7pm eT Visit the bISSEll website: www.bISSEll.com When contacting bissell, have model number of cleaner available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim.

Table of Contents