Small Belt Removal/Replacement - Bissell lift-off 94Y2 SERIES User Manual

M
aintenance and care
Small belt removal and replacement (as needed)
Occasional replacement of one or both
belts may become necessary. If that is
needed, please follow the instructions
below.
1.
Turn off the machine, and unplug it from
the outlet. Remove portable spot cleaner.
2.
Remove the nozzle by unscrewing three
screws on the nozzle cover.
3.
Turn the machine on its side.
IMPORTANT: with portable spot
cleaning pedal facing down.
4.
Remove end cap by unscrewing the 3
screws. Take care not to drop the screws into
the unit.
5.
Remove 1 silver screw from the pivot arm.
6.
Remove pivot arm by gently lifting up.
7.
Remove small brush belt.
8.
Replace small brush belt, and reverse
steps above.
9.
Manually rotate brushes by hand to make
sure they move freely. May notice a slight
resistance from the motor.
14
w w w . b i s s e l l . c a
WARNING:
To reduce the risk of fire, electric shock
or injury, unplug from the outlet before
servicing.
2.
5.
4.
6.
8.
7.
8 0 0 . 2 6 3 . 2 5 3 5