Machine Care; Maintenance And Care; Troubleshooting - Bissell SPOTCLEAN PRO 1558 SERIES User Manual

Maintenance & Care
Machine care (check regularly)
Cleaning suction gate
1.
Remove dirty tank.
2. Remove two screws and pull off
suction gate door.
3.
Wipe suction gate clean and rinse
suction gate door.
4. Replace suction gate door and
two screws.

Troubleshooting

Reduced Spray or No Spray
Possible causes
1. Formula & water tank may be empty
2. Formula & water tank may not be seated completely
3. Pump may have lost prime
Loss of Suction Power
Possible causes
1. Tanks may not be seated properly
2. Dirty tank has picked up maximum amount of
dirty water and has reached full line
3. Formula & water tank is empty
4. Suction Gate is open
Please do not return this
product to the store.
WARNING
To reduce the risk of fire, electric shock, or injury, turn
power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting.
Suction
Gate
Remedies
1. Refill tank
2. Turn power OFF; Remove and reseat tank
3. Hold end of hose below water level in tank to prime
Remedies
1. Pick up both tanks and reseat them so it they fit
snuggly on the unit
2. Empty dirty tank
3. Check fluid levels in formula & water tank
4. Check to make sure the suction gate is closed;
Follow "Cleaning Suction Gate" instructions on
top of this page.
Other maintenance or service not included in the
manual should be performed by an authorized
service representative.
Thank you for selecting a BISSELL product.
2.
www.BISSELL.com
7