Rear Panel - Strymon Flint User Manual

Flint
- tremolo & reverb User Manual

Rear Panel

Input
High impedance mono or TRS
stereo input (internal jumper
configurable, see page 6 for
configuration details).
INPUT
T R S
There are 3 EXP modes. See page 5 for details on configuring each mode.
Favorite Mode
Connect an external Strymon MiniSwitch to recall
your favorite preset. TIP: Press and hold the Reverb
BYPASS switch to store your favorite setting.
Tap Mode
Connect an external Strymon MiniSwitch to tap the
tempo of your tremolo.
NOTE: Favorite and Tap Modes can also be controlled with older Strymon Footswitches.
Left and Right Outs
Stereo outputs. Use LEFT
OUT for mono signal
output.
EXP LEFT OUT RIGHT OUT
®
OR
strymon.net/support
See
9V DC
9VDC
-
+
Standard 9V DC center negative
power input. 250 mA available current
required.
Expression Pedal Mode
Connect a standard TRS expression pedal for continuous
control over any selectable knob parameter. To select the
knob controlled by the expression pedal, hold the TREMOLO
BYPASS footswitch during power up. The first knob turned
is then assigned to the expression pedal. The maximum
position the knob is turned up to becomes the expression
pedal "toe down" maximum value.
for details.
®
pg 4