Entries; Item Entries; Single Item Entries - Sharp ER-A247 Instruction Manual

4

Entries

Item Entries
■ Single item entries
Department entries
For a merchandise classification, the register provides a maximum of 99 departments. To the departments,
group attributes such as taxable status are applied to items when they are entered.
When those departments for which the unit price has been programmed as zero (0) are entered,
NOTE
only the sales quantity is added.
• When using the department keys (for department 1 to 32)
For department 1 to 16, enter a unit price and press a department key. If you use a programmed unit
price, press a department key only.
For department 17 to 32, enter a unit price, press the
a programmed unit price, press the
Procedure
When using a programmed unit price
Unit price *
(max. 8 digits)
* Less than the programmed upper limit amounts
• When using the department code entry key
Enter a department (dept.) code and press the
key.
If the department code is programmed to preset price entry ("PRESET") type and a unit price is preset,
the register will finish its registration operation.
Procedure
Dept. code
(1-99)
You can directly enter the code No. of the department using the numeric key.
NOTE
For the code No. exceeding the figure on the numerical key board (33 and above), use this
function.
16
key and press a department key.
d
d
When using a programmed unit price
d
Unit price *
(max. 8 digits)
When the department of "PRESET" type is entered.
* Less than the programmed upper limit amounts
d key and press a department key. If you use
Department key (for department 1 to 16)
Department key (for department 17 to 32)
d key, then enter a unit price and press the
A
A
(for department 1 to 99)