Selecting An Operating Mode; Operating Modes - Sharp ER-A247 Instruction Manual

2
Selecting an Operating Mode
When you turn the register on and press the
listing available operating modes as shown below.
Mode selection window
Operating Modes
You can select any mode other than REG from the list in the mode selection window. Your register supports
the following operating modes:
REG mode
OPXZ mode
OFF mode
VOID mode
X1/Z1 mode
X2/Z2 mode
PROGRAM mode
SD CARD mode
m
This mode allows you to enter various sales information. The mode selection
window does not list this mode. To select this mode from the mode selection
window, press the
a
This mode allows clerks to take X or Z reports on their sales information.
This mode locks all operations of the register. When you select this mode, the
window will disappear. Pressing any key turns the register ON.
This mode allows correction after finalizing a transaction.
This mode is used to take various daily total reports (X1/Z1 reports).
This mode is used to take various weekly or monthly reports (X2/Z2 reports).
This mode is used to program various items.
This mode allows you to save and load the data of your register to and from an SD
card.
key, the mode selection window will appear on the display,
key.
11