Searching For Nearby Phones; Searching For A Specified Phone - Pioneer AVIC-F700BT Operation Manual

Chapter
08 Using hands-free phoning

Searching for nearby phones

The system searches for available mobile
phones near the navigation system and dis-
plays them in a list, and registers them for
connection.
1 Activate the Bluetooth wireless tech-
nology on your mobile phone.
For some mobile phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your mobile phone.
Touch [Phone Settings] on the "Phone
2
Menu".
= For details, refer to Displaying the Phone
Menu on the previous page.
3 Touch [Connection].
4 Touch [Add Device], and then [Search
devices].
The system searches for mobile phones with
Bluetooth technology that are waiting for the
connection and displays them in the list if the
device has found.
p Up to 10 mobile phones will be listed in the
order that the mobile phone is found.
5 Wait until your mobile phone appears
in the list.
p If you cannot find the mobile phone you
want to connect, check that the mobile
phone is waiting for the Bluetooth wireless
technology connection.
6 Touch the mobile phone name you
want to register.
50
Engb
A message promptings you to enter a PIN
code appears.
Enter the PIN code "1111" using the
7
mobile phone.
When a connection is successfully estab-
lished, a connection complete message ap-
pears, the screen returns to the "Phone
Settings" menu by touching [OK].

Searching for a specified phone

If you cannot connect your phone in the regu-
lar two methods previously described, try this
method if your phone is found in the list.
1 Activate the Bluetooth wireless tech-
nology on your mobile phone.
For some mobile phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your mobile phone.
Touch [Phone Settings] on the "Phone
2
Menu".
= For details, refer to Displaying the Phone
Menu on the previous page.
3 Touch [Connection].
4 Touch [Add Device], and then [Select
specific devices].