Start Printing - Canon EOS REBEL T6i Instruction Manual

The [Default] setting for printing effects and other options are the

printer's own default settings as set by the printer's manufacturer. Refer
to the printer's instruction manual to find out what the [Default] settings
are.
Depending on the image's file size and image-recording quality, it may

take some time for the printing to start after you select [Print].
If image tilt correction (p.327) is applied, it may take longer to print the

image.
To stop the printing, press <

[OK].
If you execute [54: Clear all camera settings] (p.267), all the settings

will revert to their defaults.
Set the date and file number
5
imprinting.
Set them if necessary.

Select <

I
Set the print settings as desired, then

press <0>.
Set the number of copies.
6
Set it if necessary.

Select <

R
Set the number of copies, then press

<0>.

Start printing.

7
Select [Print], then press <0>.

> while [Stop] is displayed, then select
0
>, then press <0>.
>, then press <0>.
w Printing
325