Appending Dust Delete Data - Canon EOS REBEL T6i Instruction Manual

Appending Dust Delete DataK
3
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
that may be visible on captured images. However, in case visible dust
still remains, you can append the Dust Delete Data to the image for
erasing the dust spots later. The Dust Delete Data is used by Digital
Photo Professional (EOS software, p.404) to erase the dust spots
automatically.
Preparation
Prepare a solid white object such as a sheet of paper.

Set the lens focal length to 50 mm or longer.

Set the lens focus mode switch to <MF> and set the focus to infinity

(u). If the lens has no distance scale, rotate the camera to face
towards you and turn the focusing ring clockwise all the way.
Obtaining the Dust Delete Data
272
Select [Dust Delete Data].
1
Under the [z3] tab, select [Dust

Delete Data], then press <0>.
Select [OK].
2
Select [OK] and press <0>. After

the automatic self-cleaning of the
sensor is performed, a message will
appear. Although there will be a
shutter sound during the cleaning, no
picture is taken.