Dust Delete Data - Canon EOS REBEL T6i Instruction Manual

Dust Delete Data

After the Dust Delete Data is obtained, it is appended to all the JPEG
and RAW images captured thereafter. Before an important shoot, it is
recommended to update the Dust Delete Data by obtaining it again.
For details about using Digital Photo Professional (EOS software) to
erase dust spots, refer to the Digital Photo Professional Instruction
Manual (p.406).
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Be sure to use a solid-white object such as a new sheet of white paper. If the
object has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with EOS software.
3 Appending Dust Delete DataK
Shoot a solid-white object.
3
At a distance of 20 cm - 30 cm (0.7 ft.

- 1.0 ft.), fill the viewfinder with a
patternless, solid-white object and
take a picture.
 The picture will be taken in aperture-
priority AE mode at an aperture of f/22.
Since the image will not be saved, the

data can still be obtained even if there
is no card in the camera.
 When the picture is taken, the camera
will start collecting the Dust Delete
Data. When the Dust Delete Data is
obtained, a message will appear.
Select [OK] and the menu will
reappear.
If the data is not obtained successfully,

an error message will appear. Follow
the "Preparation" procedure on the
preceding page, then select [OK]. Take
the picture again.
273