Start Printing - Canon EOS 5D Mark III Instruction Manual

With Easy printing, you can print another image using the same settings.

Just select the image and press the <
the number of copies will always be 1. (You cannot set the number of
copies.) Also, any trimming (p.303) will not be applied.
The [Default] setting for printing effects and other options are the printer's

own default settings as set by the printer's manufacturer. Refer to the
printer's instruction manual to find out what the [Default] settings are.
Depending on the image's file size and image-recording quality, it may

take some time for the printing to start after you select [Print].
If image tilt correction (p.303) is applied, it may take longer to print the

image.
To stop the printing, press <

[OK].
If you execute [54: Clear all camera settings] (p.56), all the settings

will revert to their defaults.
5
Set the date and file number
imprinting.
Set if necessary.

Select <

I
Set as desired, then press <0>.

6
Set the number of copies.
Set if necessary.

Select <

R
Set the number of copies, then press

<0>.
7

Start printing.

Select [Print], then press <0>.

m
0
> while [Stop] is displayed, then select
>, then press <0>.
>, then press <0>.
> button. With Easy printing,
wPrinting
301