Canon EOS REBEL T6i Instruction Manual page 365

6 Set-up 2 (Yellow)
Auto power off
LCD brightness
LCD off/on button
Date/Time/Zone
LanguageK
Viewfinder display
GPS device settings
When using Wi-Fi function or GPS device, be sure to check the countries

and areas of use, and use the device in accordance with the laws and
regulations of the country or region.
[Wi-Fi/NFC] cannot be set if the camera is connected to a computer,

printer, GPS receiver, TV set, or other device with a cable. When [Wi-Fi/
NFC] is set to [Enable], you cannot connect the camera to the above
devices with a cable.
When connecting this camera and the GPS Receiver GP-E2 with a

cable, update the firmware of GP-E2 to Ver.2.0.0 or later. With the older
versions, you cannot use this camera and GP-E2 connected with a
cable. Note that GP-E2 can be used by attaching it to the camera's hot
shoe.
For how to update the firmware, refer to the Canon Web site or contact
the nearest Canon Service Center.
30 sec. / 1 min. / 2 min. / 4 min. / 8 min. /
15 min. / Disable
Adjust the brightness (seven levels)
Shutter button / Shutter/
Date (year, month, day) / Time (hr., min., sec.) /
Daylight saving time / Time zone
Select the interface language
Grid display: Hide / Show
Flicker detection: Show / Hide
Settings available when the GPS Receiver
GP-E2 (sold separately) is attached
3 Menu Settings
T / Remains on
Page
257
258
270
42
44
62
63
-
365