Canon EOS REBEL T6i Instruction Manual page 381

Sensor Cleaning Problems
The shutter makes a noise during sensor cleaning.
If you selected [Clean nowf], the shutter will make a noise, but no

picture is taken (p.271).
Automatic sensor cleaning does not work.
If you repeatedly turn the power switch <1> / <2> at a short

interval, the <f> icon may not be displayed (p.40).
Printing-Related Problems
There are fewer printing effects than listed in
the instruction manual.
Contents displayed on the screen vary depending on the printer. This

instruction manual lists all the printing effects available (p.324).
Direct printing does not work.
If any of the following shooting modes or functions is set, the camera

cannot be connected to a printer. Cancel all the relevant settings, then
reconnect the camera to the printer with an interface cable.
• <F> or <G> in <8> mode
• Multi Shot Noise Reduction
• [51: Wi-Fi/NFC] set to [Enable]
Computer Connection Problems
I cannot download images to a computer.
Install the EOS software (EOS DIGITAL Solution Disk CD-ROM) on

the computer (p.404).
If [51: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected

to a computer. Set [Wi-Fi/NFC] to [Disable], then reconnect the
camera to a computer with an interface cable.
Troubleshooting Guide
381