Custom Wireless Flash Shooting - Canon EOS REBEL T6i Instruction Manual

Custom Wireless Flash ShootingK
Fully Automatic Shooting with One External Speedlite and Built-in Flash
The 8:1 to 1:1 flash ratio is equivalent to 3:1 to 1:1 stops (1/2-stop increments).
This is fully automatic wireless flash
shooting with one external Speedlite and
the built-in flash.
You can change the flash ratio between
the external Speedlite and built-in flash
to adjust how the shadows cast on the
subject.
On the menu screens, the <0> and
<1> icons indicate the external
Speedlite, and the <3> and <2>
icons indicate the built-in flash.
Select [CustWireless].
1
Follow step 5 on page 183 to select

[CustWireless], then press <0>.
Select [Wireless func.].
2
For [Wireless func.], select [0:3],

then press <0>.
Set the desired flash ratio and
3
take the picture.
Select [0:3] and set the flash ratio

within 8:1 to 1:1. Setting a flash ratio
to the right of 1:1 is not possible.
If the built-in flash output is not enough,

set a higher ISO speed (p.122).
185