Installation - Sanyo SFX-11 Service Manual

1. INSTALLATION
To unpack tha SFX-11:
1. Open the carton.
2. Remove the accessories (handset, recording paper roll, etc.) from the carton.
\
3. Remove the fax machine along with the foam braces on both sides.
4. Remove the polyethylene wrapping around the fax machine.
5. Remove the transportation tapes.
6. Save the carton and the foam braces for later storage and/or shipping.
7. Place the machine where there is access to an AC outlet and a modular phone jack. (Be sure to observe the
precautions below.)
Placement precautions
Avoid piacing the SFX-11 in humid or dusty places, or in places where it wiil be exposed to excessive heat
(direct sunlight, heaters, etc.).
Do not step on, or set anything on, the AC cord. DAMAGE TO THE AC CORD iS A SAFETY RISK AND CAN
CAUSE A FIRE.
Install the unit only on a stable surface.
Do not connect the SFX-11 to the same AC outlet as appliances that generate large amounts of interference
(heaters with thermostats, appliances with motors, etc.). It is best to use a completely separate electrical
outiet.
Keep the SFX-11 away from water. if water accidentally
CN'WS
the unit, IJnPlu9 the AC power cord immediately.
DO NOT SWiTCH THE UNIT ON AGAiN. Contact an authorized Sanyo service center or dealer.
Handling pracautiona
Do not remove any parts that are held in place with screws. (The SFX-11 does not contain any user-serviceable
items).
Maintain standard room temperature 5°C - 35"C(41°F - 95°F) during use, Do not subject the unit to shock or
vibration. Do not move the unit while it is in use.
A rapid increase in room temperature in cooi weather can cause condensation to form inside the unit. If this
happens, wait at ieaat 15 minutes after turning the unit on before attempting to operate it. Faiiure to do so may
result in papar jams and/or poor print quality.
When cleaning the cover or operation panei of the unit, wipe gently using a damp cloth to which a smaii
amount of a neutral detergent has been added. NEVER USE SOLVENTS OR CHEMICALLY TREATED CL~HS.
Telephone line and AC connections
9 The SFX.11 should be @share a telephone Ihne cord ',wth other communica-
tion equipment, except extension telephone andlor answering machme pre-
pared for the connecton, as this may obstruct the proper functioning or me
unit
To Wall jack
Telephone line cord*
+ e-
/
—
. The telephone hne cord dttfer w!th each country
e-o--m- -,0-.-9.
~=" '~ ~andsetack
Another telephone andlor answering machme can be connected to the SFX-11
through the Ihne cord suppled by SANYO dealer.
~
Power supply
"u
C onnect AC plug mto
AC
outlet.
—l—