Sanyo SFX-11 Service Manual page 39

SW No. SEITING ITEM CONTENTS SE'tTING NO. FACT. SET EXPLANATION
79 Interval between 75 msec. 00 00 This is to set the interval between RTC and Q,
RTC and Q 0.3 sec.
01
for the purposeof correctingthe mismatching
0.5 sec. 02 of between Sanyo and other manufacturers
machine.
CCITT recommendationis 75 f 20 ms.
81 FSK delay
O msec. 00 00 This is to set the delay for correcting the"
100 msec. 01 mismatching of between Sanyo and other
200 msec. 02
manufacturers machine.
300 msec. 03
400 msec. 04
82
Tx.
Attenuator 0to15db ooto15 06 This is to set the transmission level attenuation
for control and video signals.
83 DTMF Attenuator 0to15db Ooto 15 04 This is to set the transmission level attenuation
for Dual Tone Modulated Frequency (DTMF)
dial.
.—
84 Cable Equalizer O km- 00
01 –
An equalizer which adjusts the characteristics
1.8 km 01 of the ,non-loaded cable between fax and
3.6 km
02
exchange station. Set in response to the
5.6 km 03
distance to the exchange.
88 Closed Reception
OFF 00 00 Even when the select reception is set recep-
Sanyo free mode ON
01
tion is free from any Sanyo fax machines at
ON (SETTING
No.
01).
* In case of fixing the overseas transmission mode, set to SW No. 71 to 01, SW No. 78 and 79 to 01 or 02.
* The SW No. 60 through 88 are classified as follows.
60.61 : For testing purpose
66 : For checking the party's responce
67 through 74 : Countermeasure for the reception problem
75 through 81 : Countermeasure
for the transmission problem
82 through84 : Countermeasure
for the problem caused by line characteristics
88 : Others
—37—