Storage Device - Samsung SRN-473S User Manual

Storage device

You can check information on storage devices.
device/format
You can check storage devices and their capacity, usage as well as status.
Devices available are HDD, and USB devices (Memory, HDD).
[menu]  [enTer]  ▼  <menu>  [enTer]  ▼  <device>  ►▼  <Storage device> 
[enTer]  ▼  <device/format>  ▲▼◄►  [enTer]
• Storage Status : Displays the working status of a storage device.
- Red : Displays the situation of video loss.
- Green : Displays the normal situation without video recording losses.
- Status
Full BPS : Displays the current rate of recording.
`
Current Loss Rate : Displays the current recording loss rate.
`
Max Loss Amount : Displays the maximum amount of losses up until now.
`
• No. : You can check the designated number for the built-in HDD.
If you want the find out about the location corresponding to the HDD number, refer to the <HDD Map>.
`
• Capacity : Displays the amount of storage device use and the full capacity.
• Usage : Designate the purpose of use for a storage device.
• Status : Displays the current working condition of a storage device.
For inspection or replacement of HDD alarms, please refer to "hdd Alarm Setting." (Page 84)
- Normal : It is displayed during normal operation.
- Inspection : Operating with partial problems.
- Replacement : It is displayed when you can no longer use it.
• Temperature : You can check the temperature of the HDD mounted in the NVR.
English _83