Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user's own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.
• SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.
Operating Temperature The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F). This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one. Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand at room temperature for a period.
overview CONTENTS OVERVIEW Important Safety Instructions Before Start Contents Features Part Names and Functions (Front) Part Names and Functions (Rear) Remote Control Checking the installation environment INSTALLATION Rack Installation Installing The HDD Connecting External Devices CONNECTING WITH OTHER DEVICE Connecting the Network Getting Started LIVE Live Screen Configuration...
Page 7
SEARCH & PLAY Search Playback WEB VIEWER Introducing Web Viewer Connecting Web Viewer (Windows) Using Live Viewer (Windows) Controlling a Connected PTZ Camera Using Search Viewer Viewer Setup 110 About 111 Connecting Web Viewer (Mac) 112 Using Live Viewer (Mac) 114 Mobile Viewer 115 SEC Backup Viewer BACKUP VIEWER...
Page 8
overview FEATURES The product compresses camera inputs from 8/16 channels with H.264 video codec, and supports simultaneous recording and playback of 8/16-channel audio input to/from HDD. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data.
Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PART NAMES AND FUNCTIONS (FRONT) SRD-842/1642 Part Names Functions REC : Lights on when recording is in progress. LED Indicator POWER : Displays the power ON/OFF status. USB Port Connects the USB devices. 10_ overview...
SERIAL Serial port for connecting to a POS device. Power Power connection port. - ALARM IN : Alarm Input port. SRD-842 : 1~8 CH ALARM SRD-1642 : 1~16 CH - ALARM OUT 1~2 : Alarm Output port. RS-485 Used for RS-485 communication. (+, -) USB connector port.
overview REMOTE CONTROL POWER Displays the Exit pop up screen. Starts or ends the live recording. NUMBER [0~ + 10] Used as the numeric input keys, or displays a single channel. Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key. Displays or ends PTZ.
Page 13
Using the Numeric buttons CHANNEL 1–9 Press each button between 1 to 9. CHANNEL 10 Press the [+10] button first, then press the 0 button again within 3 seconds. CHANNEL 11–16 Press the [+10] button first, then press any number between 1 to 6 within 3 seconds. Changing the Remote Control ID Remote control’s ID and DVR’s ID should be matched for proper operation.
installation Please take note of the followings before using this product. • Do not use the product outdoor. • Do not spill water or liquid in the connection part of the product. • Do not impose the system to excessive shock or force. • Do not pull out the power plug forcefully.
RACK INSTALLATION Install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides (2 screws on each side). Fix the screws not to be loosened by vibrations. Cautions when Installing in the Rack To install multiple DVRs in the rack, make sure to separate the FOOT at the bottom of each DVR. 1.
installation INSTALLING THE HDD Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product.
Page 17
2. Mount a HDD and screw it in using the screws provided. Make sure to fasten screws tightly. After mounting the HDD, Please connect HDD power cable and data cable. 3. You can check the HDD map directly on the DVR. Refer to “Storage Device >...
connecting with other device CONNECTING EXTERNAL DEVICES The following figures are based on Model SRD-1642 SPOT NETWORK VGA OUT SERIAL AUDIO OUT HDMI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 DC 12V VIDEO IN AUDIO IN...
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit>. (Page 52 ) Connecting the Alarm Input/Output The Alarm In/Out port at the back is composed of the following. SRD-842 Alarm Sensors • ALARM IN 1 ~ 8 : Alarm Input Port • ALARM OUT 1 ~ 2 : Alarm Output Port...
Page 20
connecting with other device SRD-1642 Alarm Sensors • ALARM IN 1 ~ 16 : Alarm Input Port • ALARM OUT 1 ~ 2 : Alarm Output Port COM1 COM2 ALARM OUT ALARM IN (30VDC 3A, 250AV 3A MAX) 20_ connecting with other device...
Connecting the RS-485 Device Connect the [+, –] device through the back port. system keyboard PTZ camera You can connect and control the PTZ camera which supports the RS-485 communication. Check if the RS-485 device is compatible with the product first. Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it.
Page 22
connecting with other device Connecting to the Network using the router Broadband Router xDSL or Cable Modem xDSL or Cable Modem External Remote PC NETWORK DDNS Server (Data Center) Connecting to Network through PPPoE RJ-45 Ethernet Cable (Direct Cable) PPPoE MODEM Windows NETWORK Network Viewer...
live GETTING STARTED Starting the system 1. Connect power cable to the product’s rear. It takes about 10 seconds to display the start screen after booting. 2. The boot up screen appears. Booting up may take about 3 minute, as indicates progress with icons.
Page 24
live Shutting Down the System You can shut down the system only if you have logged in to the DVR. You require permission to shut down the system if you are not logged in as admin. 1. Hold the [POWER] button on the remote control for over 3 2014-01-01 01:10:25 seconds, or right click and click <Shutdown>.
The initial administrator ID is “admin” and the password should be set when logging in for the first time. Set password for your wireless network if you use the product with a wireless router. Being not protected with password or using the default wireless router password may expose your video data to potential threat.
live LIVE SCREEN CONFIGURATION Icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. 2014-01-01 01:10:25 CAM 01 Part Names Functions Current Date, Time Displays the current time and date. Login Information When you are logged in, the “LOG ON”...
Page 27
Part Names Functions Displayed if no input is entered in the condition that the camera is set to <ON>. Video Input Status Nothing will be displayed on the screen if the camera is set to <OFF>. Camera Name/ Channel Displays the camera name and the changed channel, if any. Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
Page 28
live Split Mode Menu The context sensitive menu in split mode differs, depending on the login/logout status. 2014-01-01 01:10:25 Scene Mode Spot Out Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Logout Menu Functions Scene Mode...
Page 29
Single Mode Menu The single mode menu is available only in Single Mode. The menu, which appears as <Screen Mode> on a single screen, appears as <Full Screen> after selecting only one channel on a split screen. 2014-01-01 01:10:25 2014-01-01 01:10:25 Scene Mode ...
Page 30
If you click the launcher menu using the mouse, it directly goes into the menu. If no input is entered for 10 seconds, the menu will disappear. The Launcher menu can be accessed only by using the mouse. SRD-842 do not support the 16-split screen mode. 2014-01-01 01:10:25...
To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu. Press the [MODE] button on the remote control to switch the mode in the sequence of the launcher menu items. SRD-842 do not support the 16-split screen mode. CH10 CH11 CH12...
live Manual Switching Press the left/right button on the remote control, or click the arrow <_/+> key to move to the next split mode. • If pressing the right [+] button in 9-split mode : 9-split (CH 1~9) mode 9-split (CH 10~16) mode Auto Sequence CH10 CH11 CH12...
Switching to Single Mode When in split mode, select and double-click a desired channel to switch to its Single mode. Press the number corresponding to a desired channel on the remote control to switch to its Single mode. Refer to “Remote Control > Using the numeric buttons”. (Page 13) Ex : If double-clicking CH 3 or pressing the number “3”...
live ZOOM This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. 1. Select <Zoom In> in the right-click menu. Press the [ZOOM] button on the remote control, or simply click < >...
EVENT MONITORING This will display the channel in sync with a specific event (Sensor/Motion/Video Loss/Tampering) if it occurs. In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 54) • If multiple events occur simultaneously, the screen will switch to a split mode. - 2~4 events : 4-split mode - 5~9 events : 9-split mode - 10~16 events : 16-split mode...
main menu You can setup the system properties, devices, and options for recording, event, backup and network. SYSTEM SETUP You can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language You can check and setup the current Date/Time and time related properties, as well as the language used for the interface on the screen.
- Time Server : Enter an IP or URL address of the time server. Date/Time/Language - Last Sync Time : Displays the most recent synchronization Date/Time/Language Holiday time from the selected time server. Date 2014 -01-01 YYYY-MM-DD Time Synchronization Setup - Activate as Server : Set to <Use>...
Page 38
main menu Permission Management You can set permissions of each user over the DVR's specific function and settings. Setting the Administrator You can set and change Administrator’s ID and password. The administrator can use and set all menu items and functions. Using the mouse may help make setup easier.
Setting the Group You can create user groups and setup permissions for those user groups. You can register a user for each group in <User>. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <System> window to Permission Management move to <Permission Management>, and press Group...
main menu To restrict the user permissions If the admin restricts all permissions of an added group, the users belonging to that group can access only the default minimum menus and can change the user’s own password only. 1. Start the DVR. If all permissions are restricted, only the Login dialog should appear.
Setting the User You can add a user and edit information of a registered user. Users can be added only if a group was created in <Group> menu. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <System> window to Permission Management move to <Permission Management>, and press User...
main menu • Manual Input of ID : Prompts you to enter the user ID manually for the login process. - Checked ( ) : Encloses the registered user IDs with the [ ] symbols. Login Use the virtual keyboard to enter the user ID. ...
• Updating the Software 1. Connect a device storing the software to be updated. (It may take about 30 seconds to recognize the device.) Upgradeable devices include USB memory and network device. To update the network, the current DVR should have been connected to the network. Upgrade via the proxy server may not be enabled due to the restricted access.
main menu Settings You can copy and import the DVR settings by using a storage media. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <System> window to System Management move to <System Management>, and press [ENTER] Settings System Information button.
Event Log Event log shows recorded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <System> window to Log Information move to <Log Information>, and press [ENTER] button.
- If set to <OFF>, the channel’s audio is off on the Live screen and not recorded. Audio output is available for only 1 channel. SRD-842/1642 support audio of 1 to 4 channels only. • CH Name : Up to 15 characters including blanks are allowed.
Page 47
• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out. If set to <OFF>, the channel is not listed in the Auto Sequence mode. • Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences.
main menu Setting the PTZ To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the <Remote Device> settings. (Page 52) Using the mouse may help make setup easier. 1.
Storage Device You can check information on storage devices. Confirming Devices You can check storage devices and their free space, usage as well as status. Devices available are HDD, and USB devices (Memory, HDD). Using the mouse may help make setup easier. 1.
Page 50
main menu Formatting You can format a storage device. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Device> window to Storage Device move to <Storage Device>, and press [ENTER] button. Format Device HDD Alarm 2.
Page 51
HDD Alarm You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Device> window to Storage Device move to <Storage Device>, and press [ENTER] button.
Page 52
main menu Remote Devices You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Device> window to Remote Device move to <Remote Device>, and press [ENTER] button.
Page 53
• POS Device Setup : Sets the communication setups for the POS Device POS device and DVR. POS USE POS Device Setup It is independent to the Remote Device setup. Preset Port/Ethernet None No preset None POS Device Setup None No preset None None...
main menu Monitor You can configure information to be displayed and its format for Spot Out monitor. Setting the Monitor Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Device> window to Monitor move to <Monitor>, and press [ENTER] button. Monitor Spot Out Mode...
Setting the Spot Out You can set the DVR to output information / video apart from the monitor out. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Device> window to Monitor move to <Monitor>, and press [ENTER] button. Spot Out Monitor Mode...
main menu SETTING THE RECORDING You can setup scheduled recording, event recording and other recording related settings. Recording Schedule Make your reservation on a date and time to schedule the recording on specified time. Using the mouse may help make setup easier. 1.
Recording Color Tags Color Part Names Functions White No Recording No schedule / event recording Orange Continuous Scheduled recording only Blue Event Event recording only Green Both(Cont&Evnt) Both scheduled / event recordings Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>- <Both(Cont&Evnt)>.
main menu Setting Event Recording Properties You can set each channel’s resolution, quality and FPS for event recordings. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Record> window to REC Quality & Resolution move to <REC Quality &...
SETTING THE EVENT You can set recording options when sensor, motion, image loss detection or tampering event occurs. Sensor Detection You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration. Using the mouse may help make setup easier. 1.
main menu Motion Detection You can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the area. Using the mouse may help make setup easier. 1.
Video Loss Detection You can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Event> window to Video Loss Detection move to <Video Loss Detection>, and press [ENTER] Video Loss State ...
main menu Alarm Schedule You can set the conditions and operating hours for scheduled alarms. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Event> window to Alarm Schedule move to <Alarm Schedule>, and press [ENTER] button. Alarm1 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 2.
Page 63
If you need to install a codec in Windows, run the x264_dvr.exe file in the codec folder that is created when you back up an AVI file. - SEC : Saves data in the Samsung’s proprietary format with built-in viewer, which supports immediate playback on a PC.
main menu NETWORK CONFIGURATION It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with events. You can configure the network environment which enables such functions. Connection Mode You can set the network connection route and protocol. Setting the Connection Sets the protocol and environment of the network.
Page 65
• IP Address, Gateway, Subnet Mask, and DNS Connection Mode - For <Static> : You can directly input IP Address, Gateway, Interface Port IP Type Subnet Mask and DNS. PPPoE Transfer Bandwidth 600kbps - For <DHCP> : IP Address, Gateway, and Subnet Mask ...
Page 66
main menu Notification In a multi-browser environment, the <HTTP Port> should be set to 80 (private port). Select one between 4505 and 4530 for RTSP • Network Overview Cable/ADSL Router (External IP: 109.112.92.133, Modem Local IP: 192.168.1.1 Internet DDNS Server (www.samsungipolis.com) DVR 1 DVR 2...
Page 67
• 1st Set Port Forwarding Setting Port Forwarding is 4520~4524 (4520, 4521, 4522, 4523, 4524) Port Forwarding is 80 SRD-1642 SRD-1642 192. 168. 1. 200 192. 168. 1. 200 4520 4520 • 2nd Set Port Forwarding Setting Port Forwarding is 4525~4529 (4525, 4526, 4527, 4528, 4529) Port Forwarding is 81 SRD-1642...
main menu Connecting and Setting the Network Networking may differ from the connection method, check your environment before setting the connection mode. When no router is used • Static mode - Internet connection : Static PPPoE, leased line, and LAN environments allows connection between the DVR and remote user.
Page 69
When a router is used To avoid IP address conflict with the DVR's static IP, check followings : • Setting the DVR with a static IP - Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Area Network (LAN) environment.
Page 70
main menu • Setting Router’s Port Forwarding 1. Set the protocol to <TCP>. Connection Mode 2. External Port Range : Enter the TCP Port set in the Port Interface <Device Port> in <Port> menu of the connected DVR. Protocol Type ...
DDNS Site : iPOLiS • DDNS Settings of the Router Select the corresponding menu for the network transfer protocol of the router. • SETTING UP SAMSUNG iPOLiS DDNS Go to Your PC 1. Open your browser and go to http://www.samsungipolis. com and click <LOGIN>.
Page 72
Not Used DDNS Host Address http://www.samsungipolis.com/ Cancel 3. Under Product ID, enter the product ID you created on the DDNS Samsung iPOLiS website. DDNS Site Under Quick Connect, select <Use> and click <OK>. iPOLiS Server Name www.samsungipolis.com ...
Live Transfer Sets the quality of the image that is transferred from the DVR to the network. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Network> window to Live Transfer move to <Live Transfer>, and press [ENTER] button. Resolution ...
main menu Mailing Service You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs. If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set to <OFF>, only the text notification will be sent to the applicable email address.
Event Setting You can set the interval and type of the event that will be sent to the user. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Network> window to Mailing Service move to <Mailing Service>, and press [ENTER] button. Event SMTP Group...
main menu Recipient Setting You can add/remove a recipient(s) to/from the specified group and edit the group if necessary. Using the mouse may help make setup easier. 1. Use the up/down buttons (▲▼) in <Network> window to Mailing Service move to <Mailing Service>, and press [ENTER] button. Recipient SMTP Event...
CONTROLLING A PTZ DEVICE The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference. PTZ Device The PTZ device can be activated only if a channel in connection with the PTZ camera is selected. Getting started with PTZ The PTZ camera is available, only if a channel is selected, in the following way : Using the remote control buttons...
main menu Using the PTZ camera You can use one camera to perform all functions of PAN, TILT and ZOOM for monitoring multiple places and set the preset to your preference in a desired mode. 1. Launch the <PTZ Control> menu. 2014-01-01 01:10:25 As the <...
2014-01-01 01:10:25 The camera-specific menu appears. You can configure the settings of only those cameras that support the protocols of Samsung, Pelco D/P, AD and Panasonic. If you are setting Auto Pan or Pattern in the camera menu, press Camera Setup and hold the appropriate button for a certain time so that the ...
search & play SEARCH You can perform the search for recorded data by the time or by the search criteria such as an event. You can access the <Search> menu directly in Live mode. 1. In Live mode, right-click any area of the screen. 2014-01-01 01:10:25 The Live menu appears.
• Zoom In : The map enlarges in detail. Time Search It will switch in the sequence of 24 hours - 16 hours - 8 hours 2014-01-01 Go to First Go to Last - 4 hours. Overlapped Data List1 Zoom In Zoom Out • Zoom Out : The map will switch in the reverse order of the 00:01...
search & play POS Search You can search for data in the POS device that is connected to the DVR. You can use the mouse to select the related items. 1. Select <POS Search> in the <Search> menu. POS Search 2.
PLAYBACK Play You can play data stored in the HDD and backup a desired portion of the data. Using the mouse may help make setup easier. 1. In Live mode, click <Play> in the right-click menu or 2014-01-01 01:10:25 < >...
Page 84
search & play Using the Playback Button Part Names Functions Play Timeline Indicates the current playback point, and can be used to move. Skip Backward Moves backward by unit time. (Move by 10 minutes) Backward Fast Used for quick backward playback. (2 - 64x speed) Play Backward Slow Used for backward frame-by-frame search while in PAUSE.
web viewer INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows remote access to your DVRs. You have access to li ve video, archived video, PTZ control (if configured), etc. Product Features Network • Remote access from a standard browser • Supports PTZ camera controls • Supports 1, 4, 9, 16 camera viewing formats (maximum of 16 cameras in the list).
web viewer CONNECTING WEB VIEWER (Windows) 1. Open your web browser and type the IP address or URL of DVR into the URL address box. “192.168.1.200” is set to IP by default. Set to an available IP address in "Network > Connection Mode”.
Page 87
5. When a program installation wizard window appears, press the [Install] button to install the program. 6. When the program installation is complete, the Explorer window closes. Open the web viewer window again to log in. Live Viewer's main screen appears when you log in successfully after installing the program.
web viewer USING LIVE VIEWER (Windows) The Live Viewer screen consists of following : Menu Functions Menu Selection Switches into corresponding menu screen by clicking each menu. Address, Name, Time Displays the IP, model name, time, etc. of connected DVR. Select <DVR Time>...
Page 89
Menu Functions Controls connect PTZ camera(s). Goes to the relevant menu screen of a camera, which supports OSD menu and changes OSD Menu the menu. Display Pane Displays the video of camera connected to DVR. Logout Performs logout process. Displays the connected user ID. OSD Information Display a The channel number of the connected DVR are displayed.
Page 90
web viewer Split-Screen Click split mode selection button to switch to the corresponding screen mode. SINGLE MODE QUAD MODE NINE MODE SIXTEEN MODE To switch to full screen mode Click < >. Current split screen appears in full screen. Press the [ESC] key to exit the full screen mode. 90_ web viewer...
Page 91
Changing the Live Screen Mode 16-split mode does not support “Sequence”, “Previous” and “Next”. • : When this button is clicked, the previous screen appears. - In SINGLE MODE, the channel numbers are switched in reverse order. - In QUAD MODE, the screens are changed like 1st 4 channels (1~4) 2nd 4 channels (13~16) 3rd 4 channels (9~12) ...
Page 92
web viewer To print a screen 1. Click < > button. 2. Print current camera’s video image with the printer connected to the PC operating the Web Viewer. To save as AVI 1. Click < > button. When “AVI Setup” window appears, select the record saving path and capacity.
CONTROLLING A CONNECTED PTZ CAMERA Controlling PTZ If PTZ camera is connected, the < > icon appears on screen. When selecting corresponding camera channel, the PTZ tab is provided to allow you to control the PTZ. Part Names Functions Direction Adjustment Adjusts the direction of a camera.
Page 94
web viewer To set a preset 1. Click < > button to display “Preset” window. 2. Click < > to select a desired preset number. 3. Enter the name of preset. 4. Use direction keys to adjust the direction which camera aims at.
Page 95
Controlling OSD Menu If connected PTZ camera supports the OSD menu, press the < > to enter camera’s menu screen to change its settings. Part Names Functions Direction Adjustment You can go to a desired menu. ENTER Selects a desired item. Menu On/Off You can On/Off camera’s OSD menu settings.
web viewer USING SEARCH VIEWER The Search Viewer screen consists of following : Up to 3 users can access simultaneously. Menu Functions Menu Selection Switches to the corresponding menu screen by clicking each menu. Address, Name, Time Displays the IP, model name, time, etc. of connected DVR. Split Mode Selection Selects the type of split screen and selects the channel displayed in Display Pane.
Menu Functions Displays and zooms in/out recorded video data. If overlapping data found, this function Overlapped Data selects one of them to play. Play Control Adjusts current video’s playback speed and played time position. Displays the corresponding color depending on recorded data type if you place your Recording Color mouse cursor on that area.
Page 98
web viewer Names and Functions of Play Buttons a Moves backward by 10 minutes from the current playing point. b Plays in reverse at doubled speed. The playback speed is doubled up to 64x speed. c Moves backward by 1 second from current playing point. d Moves forward by 1 second from current playing point.
VIEWER SETUP You can configure the DVR settings remotely on the network. To configure the DVR settings, click <Setup>. System You can configure the various settings of the DVR system. Date/Time/Language For more information, refer to <Date/Time/Language> in the <System Setup> menu. (Page 36) 1.
Page 100
web viewer Holiday You can set specific dates to Holidays according to your preferences. For more information, refer to <Setting Holiday> in the <System Setup> menu. (Page 37) Permission Management For more information, refer to <Permission Management> in the <System Setup> menu. (Page 38) • Admin You can change the admin ID or the password.
Page 101
• User You can add, change or remove a user or users. • Setup You can set the user permission. System Management For more information, refer to <System Management> in the <System Setup> menu. (Page 42) • System Information You can see information of the current system. Check the Software Version, Broadcast Format, MAC Address and V1.0xh_yymmddhhmmss DVR name.
Page 102
web viewer Device You can check a list of devices that are connected to the DVR and configure the necessary settings. Click <Device> in the menu screen. For more information, refer to “Setting the Device”. (Page 46) Camera • Camera You can configure the settings of the camera that is connected to the DVR.
Storage Device You can check and change the settings of the storage device. • Device You will see a list of storage devices that are connected to the DVR. You can check the type, used/total, usage and status of the device. • HDD Alarm You can set the alarm output channel and the alarm duration for an error.
web viewer POS Device You can set the channel, preset and communication port of the POS device that is connected to the DVR. You cannot set to use the POS device remotely. Monitor • Monitor You can configure the monitoring screen settings and set the output system.
Page 105
Record For more information, refer to <Setting the Recording>. (Page 56) Recording Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. - Apply to All CH : Click <Apply to All CH> to display the confirmation window.
Page 106
web viewer REC Quality & Resolution • Standard/Event You can set the resolution, frame rate and recording quality for each channel. Record Option You can set the Disk End Mode. Event For more information, refer to <Setting the Event>. (Page 59) Sensor Detection You can set the sensor operation mode and the synchronized camera as well as the alarm output type and the duration.
Page 107
Motion Detection You can set the motion detection mode and the sensitivity as well as the alarm output type and the duration. • Motion Region Set the target motion detection area. Video Loss Detection You can set the alarm output time if a video loss occurs. Tampering Detection You can set whether to generate alarm and its dwell time for video tampering events.
Page 108
web viewer Alarm Schedule You can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs. Network For more information, refer to <Network Configuration>. (Page 64) Connection Mode A remote user can access the DVR via the network to check the current mode and the IP address.
Page 109
DDNS You can check the DDNS settings. Live Transfer Sets the quality of the image that is transferred from the DVR to the network. • Live Transfer A remote user can set the image resolution of the transferred data. Mailing Service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users.
web viewer • Group You can add a group to receive the mail if an event occurs and set the permission to receive the event mail for each group. • Recipient You can add a user or users who will receive the mail. SNMP You can configure the settings for the SNMP protocol.
CONNECTING WEB VIEWER (Mac) Safari on MAC. If you want to use SRD-Series DVR Web Viewer with Safari Browser on a Mac, please refer to this user guide and install Multi Viewer with firmware upgrade if necessary. • Mac OS versions available : 10.6 or later version • Silverlight : 5 or later • Safari : 5 or later 1.
web viewer • If Microsoft Silverlight plug-in is already installed 1. Use a web browser to connect to the DVR. 2. If Silverlight plug-in is already installed, you will see the login screen as shown. 3. If the login screen does not appear, check if the DVR set is connected properly with a valid IP address.
Page 113
Menu Functions Name, Address Displays a connected DVR’s IP address and model name. Audio Sets the sound connected to each channel to ON/OFF. Select < DVR Time > or < PC Time > for the OSD time information display setting of the Live DVR Tim, PC Time Viewer.
web viewer MOBILE VIEWER What is Mobile Viewer? Mobile Viewer is management software that enables you to connect to DVR (Digital Video Recorder) remotely and control the video playback and PTZ operations (if configured) in real time. Key Features • Remote access via Smart phone • Voice Recognition • 1-split and 4-split modes supported in Live Viewer • Supports single channel search function...
backup viewer SEC BACKUP VIEWER You can play a file that is backed up in the format of SEC. Backup in SEC format produces backup data file, library file and self-executable viewer file. If you run the backup file viewer, the backup data file will be automatically played. d e f SRD-1642_CAM 01 Recommended System Requirements...
Page 116
backup viewer Part Names Functions Set the screen’s aspect ratio to be displayed. Split Screen The screen switches to the selected split screen mode. Saves the current video’s image as in an image file. Supports jpeg file format. Screen Printout Prints out the current screen.
Embedded H.264 Compression y SRD-842 NTSC : Up to 60fps @ 960x480 / PAL : Up to 50fps @ 960x576 NTSC : Up to 60fps @ 704x480 / PAL : Up to 50fps @ 704x576 NTSC : Up to 120fps @ 704x240 / PAL : Up to 100fps @ 704x288...
Page 118
Details Item SRD-842 SRD-1642 960H/4CIF/2CIF/CIF(240fps NTSC, 960H/4CIF/2CIF/CIF(480fps NTSC, Transmission speed 200fps PAL) 400fps PAL) Up to (32)Mbps, Unlimited(8M)/2/1.5/1 Mbps/800/600/500/400/300/200/100/5 Bandwidth 0 kbps Bandwidth control Automatic Network (IPv4) Stream CIF (H.264) Remote users 4 Persons (Search up to (2), Live Unicast/Live Multicast available)
Page 119
Application Supoort Mouse, Remote Controller Samsung-E/ Samsung-T/ Pelco-D/ Pelco-p/Panasonic/ Phillips/ AD/ DIAMOND/ ERNA/ KALATEL/ VCL TP/VICON/ ELMO/GE Protocol support PTZ Control via Coaxial Cable (Samsung CCVC, Pelco-C (Coaxitron)) General Input Voltage /Current DC12V Adaptor,4A,100~250VAC, 50~60Hz Electrical Power consumption Normal 19 W (with 1x HDD)
appendix DEFAULT SETTING This returns the factory default settings. The settings are made as follows; • Use System/Load Factory Default in MENU The default settings are based on SRD-1642. The initial administrator ID is “admin” and the password should be set when logging in for the first time. Please change your password every three months to safely protect personal information and to prevent the damage of the information theft.
Page 123
Category Details Factory Default Baudrate 9600 Parity None Data Remote Device Stop bit System Keyboard Remote Control ON(00) POS Device Event Display Device Display Monitor Multi CH SEQ Time 5 sec VGA/HDMI 1920X1080 Monitor Multi Spot Spot Out Spot Out Event Display Live Screen Mode...
Page 124
appendix Category Details Factory Default Mode Sensitivity Level10(high) Motion Detection Alarm None Duration 10 sec Motion Region All Area Video Loss State Event Video Loss Detection Alarm None Duration 10 sec Mode Sensitivity Medium Tampering Detection Alarm None Duration 10 sec Alarm Schedule Alarm1 Event Sync...
TROUBLESHOOTING Symptom Countermeasures y Check if the power supply system is properly connected. The system does not turn on and the indicator on the y Check the system for the input voltage from the power source. y If the problem persists even after you have taken the above actions, front panel does not work at all.
Page 126
appendix Symptom Countermeasures y This message is displayed if there occurs a problem with the time A message of “Need to reset date/time.” Is displayed on the screen. setting of the internal clock or an error in the clock itself. Contact the retailer or the service center for more information.
Page 127
Symptom Countermeasures y If your player does not display a Live image at all, that indicates Recording does not work. recording does not work so first check if you see an image on the y Recording does not work if the recording settings are not properly screen.
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
Page 129
c) Accompany it with the information you received as to the offer to of this License, you may choose any version ever published by the Free distribute corresponding source code. (This alternative is allowed Software Foundation. only for noncommercial distribution and only if you received the 10.
consider it more useful to permit linking proprietary applications with the computer or modifying a private copy. Propagation includes copying, library. If this is what you want to do, use the GNU Lesser General distribution (with or without modification), making available to the public, Public License instead of this License.
Page 131
4. Conveying Verbatim Copies. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be You may convey verbatim copies of the Program’s source code as you included in conveying the object code work. receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice;...
Page 132
permits relicensing or conveying under this License, you may add to a In the following three paragraphs, a “patent license” is any express covered work material governed by the terms of that license document, agreement or commitment, however denominated, not to enforce a provided that the further restriction does not survive such relicensing or patent (such as an express permission to practice a patent or covenant conveying.
Page 133
15. Disclaimer of Warranty. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT restrict the users of a free program by obtaining a restrictive license from PERMITTED BY APPLICABLE LAW.
Page 134
You may charge a fee for the physical act of transferring a copy, and layouts and accessors, and small macros and small inline functions (ten you may at your option offer warranty protection in exchange for a fee. lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.
acceptance of this License to do so, and all its terms and conditions for END OF TERMS AND CONDITIONS copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the How to Apply These Terms to Your New Libraries Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to...
Page 136
with Netscapes SSL. This library is free for commercial and non- 1.3. “Covered Software” means (a) the Original Software, or (b) commercial use as long as the following conditions are aheared to. The Modifications, or (c) the combination of files containing Original Software following conditions apply to all code found in this distribution, be it the with files containing Modifications, in each case including portions RC4, RSA, lhash, DES, etc., code;...
Page 137
b) under Patent Claims infringed by the making, using, or selling of version will be given a distinguishing version number. Except as Modifications made by that Contributor either alone and/or in provided in Section 4.3, no one other than the license steward has the combination with its Contributor Version (or portions of such right to modify this License.
Page 138
• You may not pretend that you wrote this software. If you use it, or DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. only parts of it, in a program, you must acknowledge somewhere in your documentation that you have used the FreeType code. (`credits’) 8.
Page 139
For more additional information, send email to help.cctv@samsung.com. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED...
Page 140
1.20 BSD 2.0 http://www.opensource.org/licenses/bsd-license.html For more additional information, send email to help.cctv@samsung.com. 4. Neither the name of the University nor of the Department may be used to endorse or promote products derived from this software without specific prior written permission.
Page 142
License URL miniupnpc 1.5 BSD 2.0 http://miniupnp.free.fr/ For more additional information, send email to help.cctv@samsung.com. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED...
Page 143
3. The name(s) of the authors of this software must not be used to Copyright (c) 1984-2000 Carnegie Mellon University. endorse or promote products derived from this software without prior written permission. All rights reserved. THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES Redistribution and use in source and binary forms, with or without WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED modification, are permitted provided that the following conditions are...
Page 144
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
Page 145
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...