Samsung SRN-473S User Manual page 71

if you want to register a camera in pnp mode
When you connect a camera in PnP mode, the initial ID, password and DHCP mode should be set in advance.
`
J
Samsung cameras are registered for Samsung protocols and other cameras are registered by using the Onvif protocol.
`
In PnP mode, you cannot connect a device that runs the DHCP server in PoE port or camera setting port. (Ex: hub)
`
To auto-search for and register a network camera
1. In the <Cam registration> field, click on the <Auto> button.
2. Search for a network camera connected.
An already registered camera will be marked in blue in the list.
`
If you search for the camera again or if the IP is an old IP that was not assigned by the DHCP server (such as -192.168.1.100),
`
then press the < > button to check if a new IP has been assigned. If the IP is still the same, then select Assign IP to assign
the IP manually.
3. Select a camera from the camera list to see a preview of its current video feed.
Camera searched with ONVIF does not provide previews.
`
English _71