menu setup
SeTTing The deviCe
You can setup Camera, Storage Device and Monitor.
Camera
To register a camera
You can register a network camera for each channel and make connection between.
[menu] [enTer] ▼ <menu> [enTer] ▼ <device> ► <Camera> [enTer] ▼
<Cam registration> ▲▼◄► [enTer]
• Preview : View the video of the channel as a current image.
• Protocol : Show the protocol information of a registered network camera.
• Model : Show the camera model name.
• IP Address : Display the IP address of a network camera.
• Connection : Display the connection status.
• Data Rate : Displays the total amount of data received by the channel.
• PoE Status : Displays connected PoE status information.
• ONVIF Setup : You can additionally set up ONVIF protocol camera.
• Error code guides : You can check the details of generated error codes.
If the NVR has been initialized, it may not connect to cameras. Configure the network settings first and add cameras.
`
M
For more information on network settings, refer to "Network Configuration". (Page 97)
70_ menu setup