Samsung SRN-473S User Manual page 168

appendix
Problem
If I press the ESC key in full screen mode of the
WebViewer, the system does not switch to a normal
split mode.
I found it difficult to configure the network settings if
using the default search, backup and router settings.
I forgot the password.
Backup data is just not played by the PC or NVR.
You cannot move to live while playing video.
Recording does not work.
The image quality of the recording data is not good.
168_ appendix
y Press the ALT+TAB keys to select 'ACTIVE MOVIE' and press the ESC key
again. The system will switch to a normal split mode.
y For more information, refer to the user manual.
y If you want to check the basics of the product for a quick start, refer to the
quick start guide (backup, search).
y If you use the router for network connection, refer to the "Connecting
and Setting the Network" section in this manual.
y Contact the NVR administrator for help.
y When you are backing up data, you have choices about the player either: PC
or NVR. Make your selection before proceeding.
y If you are using the PC to play the data, the format of the backup file should
be either SEC.
y If you are using the NVR for this purpose, formatting backup files should be
done by the NVR.
y On the remote control, press the Stop [
button in the launcher to immediately move to the live screen.
y If your player does not display a Live image at all, that indicates recording
does not work so first check if you see an image on the screen.
y Recording does not work if the recording settings are not properly configured.
1) Direct recording: press the [REC] button on the NVR remote control to start
recording immediately.
2) Scheduled recording: In menu/recording/scheduled recording, set the
desired recording time to start recording at that time.
- <Continuous> recording: Must start recording at the time.
- <Event> recording: When an event occurs (alarm, motion detection,
video loss), recording is started. If there is no event, there is no
recording.
- <Continuous/event> recording: If there is no event, continuous
recording is done and when events occur, event recording is done.
y Increase the resolution and quality level in Menu – Record – Quality /
Resolution.
1) Resolution: Select a bigger size when specifying the recording size.
The recording image in the CIF format shows a deteriorated quality as
it is enlarged from a small-sized image.
2) Record Quality: Specify a bigger level for the recording quality.
y If you increase the resolution and the recording quality, the data size
increases accordingly. So the HDD will be filled faster. Overwriting will
overwrite the existing data so recording will proceed at a shorter interval.
Action
] button or press the [@]