Install Wizard - Samsung SRN-473S User Manual

install wizard

As shown below, proceed through each step of the <install wizard>.
1. In the <Language> screen, select the language and press
the <next> button.
2. In the <id/pw> screen, set the password and press
<next>.
If you click < >, a basic guide for password setup is
`
M
displayed.
3. In the <network> screen, set the network access method
and the access environment. To use a simple intranet, click
<next>.
• Network 1 (Camera) : Connects to the camera and receives the video feed from the camera
• Network 2 (Viewer) : This is a port for transmitting an image to the webviewer.
• Network 1 / Network 2 Setup
- IP Type : Choose the network connection method.
- IP Address, Subnet Mask, Gateway, DNS
If the LAN cable is not connected to the port, the setting button will not be activated for use. Check the LAN cable
`
M
connection.
The built-in DHCP Server in NVR will turn on automatically at stage 3. At this stage, using the existing DHCP server in the
`
same network may cause a problem, as two DHCP servers would be simultaneously operating.
For more details on network settings, refer to the user manual.
`
4. After setting the date/time settings in the <date/Time>
screen, click on the <finish> button to launch the setting
completion window.
5. In the setting completion window, click on the <oK> button
to finish camera setting and launch the camera registration
screen.
English _35